Panamera Shroud and Halo Wiring

Hey everyone, got my switchback halos and panamera switchback shrouds and am planning out how to wire them to a Tacoma. It’s an 09. If anyone has done this before could you post up how you wired them so the halos are white and DRL and then also turn signals?

Would you know how to turn off the halos at night when I turn the headlights on?

Any help is greatly appreciated!

 

No idea what you're working with, but you can use the normally closed contacts of a relay to make a circuit turn off when the relay is energized by a different circuit.

 

What do you need from me in order to help? It’s just an 09 Tacoma. Fitting in the panamera shrouds and halos sold by the retrofit source.

 

Try checking this...

https://www.tacomaworld.com/threads/how-to-headlight-retrofit-w-hid-demon-eyes-halos-install.490836/

if that doesn't help, PM the OP of the thread below. He's very helpful.

 

Any progress on this? I'm looking to do the exact same thing but am not having much luck with it. I did see the how to above but it requires disabling the DTRLs which I am trying to avoid.

 

I’ll check back when I dive in further. I’m still getting everything together on this. I’ve painted the shrouds and such. I want to disable the DTRL and keep the blinker function so we’ll see what happens

 

Anyone have an idea how to do this? I want to disable the inner amber DTRL and keep the halos as DTRLs. If I cut the power to the amber DTRL will I get the hyper flash if I tap into that? I really just need soe help wiring these switchbacks.

 

Hey bro ever find out how to wire them? I'm putting them on my 07.