Tacoma Bed Specs and Dimensions

Specifically for a 2016 Toyota Tacoma TRD Sport Access Cab Long Bed. I believe the specs are close for the 5ft bed as well (width, height ect), given there is 12" taken from the front of the bed.

I had to spec out the bed for a project I'm working on, so I threw together a drawing to just in case anyone on here wants an accurate reference.

The measurements should be pretty close on but I'll say +/- 0.5 Inches as a disclaimer.

note: Specs represent inside dimensions of the composite tub, not including bed rails or tailgate

 

Missing a few measurements.

 

Dacon, was not meant to be a comprehensive drawing with every possible dimension included. or else I would have at least added radius of fillets, rib size and spacing, outlet location ect.

You've got 6 question marks on here...the length of the wheel well at the longest point is 36" and 24" at the shortest point. The rest of your question marks can be derived using the other dimensions on the drawing.

Hope this helps,
Luke

 

NEED to know the bolt size, metal composition, each panel size to the 0.00 dimension, who built it and why.
(just giving you a hard time )

 

Thank you for the info!
I assume this is same for TRD Sports DCLB?

 

Like my boss, except hes serious lol

Correct Sir

 

Planning to make a bed platform/storage unit, thanks for this!

 

Badass! I’m working on something similar...hope this helps

 

Nice work.

Thanks!

 

FYI link to my build thread this originated from

https://www.tacomaworld.com/threads/gen-3-adventure-camper-build.522370/

 

Does anyone know if the 9.5" measurement from the truck bed bottom up to the top of the wheel wells is the same for 1st gens?

 

Just curious if you ever measured this out?

I've always wondered how close the old beds are to the composite

Thanks,
Luke

 

Any idea if this is the same for an '07 trd access cab with 6ft?

 

Should be about the same.

 

Much Appreciated!!!

 

pdxtaco02, thanks very much for posting!

Working on plans for my home brew drawer system - in the event that spring ever actually comes to The Great White North - and 30 seconds searching here, still in my jammies, saved me heading out into the freezing rain/snow, shoveling said snow out of my box, and measuring....truly appreciated!


Gotta love Tacomaworld....so much good work here.

 

You're the fucking man for this. Designing my bed interior and you just saved me a lot of work.

 

I came across this thread a bit ago and have been going through my own build for my 2016 TRD pro double cab and wanted to throw it in here in case anyone is in need. Started with the ones from this thread and double checked/made some adjustments to account for the wheelwell going all the way forward to the cab. Hope it helps someone and thanks to this thread for getting me started!