Because We're Not North Enough To Be NOVA, We're Just Stuck Between the North and the True South

OK.

This morning at around 10:30am, Fredericksburg, Rt. 3 just before the I-95 interchange.

A dude in a black 3-gen was checking out my black & white 2-gen as we were driving more-or-less side by side.

Anybody we know?

 

I can confirm that. Anytime in hunting season up there is sketchy. they are not too friendly if they catch you. I know a lot of them.

 

Depending on if Im still in the area, I would like to join in on that.

 

I got some wheels and tires Im likely selling pretty soon if you might be interested. I plan to get my regear done in the following week after going to dirties.

 

What's up everyone. Just remembered this thread was up here and been wanting to do some trails (light). I used to be a member of mid Atlantic toyota crawlers and did a few GWNF camping trips with them in my 1st gen. RIP (frame recall but big payday haha) I now have a 2nd gen with just a block/spacer lift. If anyone is selling a decent suspension set up let me know. Anyways, just trying to meet up with like minded people again and maybe take a couple trips. Here is what I'm working with now. 2010 DBCB LB leer cap with poor mans lift. Running 295/75/18. Also installed a joying android tablet in the dash. Nothing crazy but it works and I finally have some funds to mod it a little more. Look forward to hearing from new people. Cheers!

 

My new Superwinch 9500lb tiger shark winch. Came in yesterday i got home around 9pm and just couldn’t resist putting it on. Took about maybe 45 minutes, just gotta pull the cable all the way out and respool the cable a little tighter and she’s ready to go.

 

@mattRADICAL Are you still planning on coming out tomorrow for the Bald Mountain run? We're still planning on meeting at 0900 at the Sheetz (2870 Stuarts Draft Hwy, Stuarts Draft, VA 24477). If everyone that's said they're sill coming shows, we'll have 8 trucks. Hopefully, the show doesn't screw it up.

 

So how did it go? Sorry I couldn't make it.

 

It was a good time. We had 7 trucks in total. I posted some pictures in my build thread. I bashed the rear of the passenger bedside into something but didn't notice it until Sunday when I went out to run the truck through the car wash. I crawled under the truck and hit the dent from the backside and knocked it out. We took the 'alternate' trail which was my demise. Had to get dragged and winch myself up most of it. I got a few good, wild runs up a few tough trail sections revving like a madman and churning up the ground.

 

Low range off road bed rails and Smittybilt RTT all mounted up

 

Nice man, it really is coming along! I will be curious to see whats next to be revealed after the holiday.

 

Looks good. One question, is that a really long ladder at a hell of an angle, or is it the angle of the picture? Looks like there is one section too many to that ladder. I don't have a RTT, so not sure what it's supposed to be.

 

Just putting some feelers out for now, but I am probably going to be selling my uca's soonish. They are the boxed style with uniballs. They have went by a few different names as different folks "owned the rights". DSM used to private label them, then desert products did, then dirt king. Bushings are pristine and uniballs are in great shape. I have had them for about 3 years, but my truck hasn't been my daily for longer than that so they only have about 6k miles on them with 1 wheeling trip. Also, if interested I have a set of brand new uniballs for them I can sell with along with the press cups that are needed to do the work. I bought these when I got the uca's so my first routine maintenance would be sitting on the shelf waiting.
Pics for reference, I will clean them all up when I remove them to actually sell.

Any questions just ask. If I sell it will be a more than fair price and it won't be obo as the price break will already be figured in. If I can't get what I want for them I will simply put them in storage.

 

Epic keeping it real!

 

Dats pretty close to asking price!

 

What are you swapping to?

 

Tubular style uca's with uniballs.