Norcal Spotted and BS Thread

I called bass pro to stock up on 223. They said i still have another year??

 

Thought about that. It's not that far from Eagle Lakes. Maybe do a little camping and run up the road for a few hundred rounds.

 

Did someone say Eagles Lake!! Lol

 

Danny's back, tell some men.

 

Lets Go!

 

That was easy

 

I'd be down.

 

I wouldn’t mind having to pull the box if I had to get it in to work on it but to have to pull the rack to get it in wouldn’t be an option.

 

Yes it does. The VIN sticker in the door says they would be 3.15. I'm going 5.29. Both the taco and runner. Just said screw it. Go big and lock them up.

 

I have a stupid question, if I'm looking at a lower ball joint (uninstalled) and the boot is loose around the rod where the steering stop attaches, and I can see the grease inside that's bad right? It's not something like where it forms a seal once the steering stop is attached, right?

 

New or used(old)? I dont ever remember seeing grease in a new one.

 

It's used, on a set of LCAs that I'm planning to install new bushings on and swap with my current ones. I'll get a pic to show what I mean.

Edit - here's pic

 

There will be some grease visible if the boot is loose. I like to double check mine by what I call the push test. If the ball pushes into the socket any bit at all I junk it and grab a new one. Super cheap insurance on first gen.

 

You know you have enough lift when your tires are no longer anywhere near being in the wheel well

 

A sure fire way to eliminate rubbing on fenders!

 

So the genius bar at apple unlocked my phone but my icloud account was hacked and I can't access it. Lost all of my contacts, etc.

If you have my number send me a text so I have yours again. I also accept dick pics

 

Ok my wife totally thinks this is a Weiner sight that is all about dicks. Totally not true though it's real close I see!

 

Not sure I'd worry though when in doubt, change it out! Is it second gen? Does I'd bolt or press? Easy ether way.

 

what if you have a c&r/ffl03? I need to check into it. maybe a way around the law. your a licensed collector then

 

Start reloading. The separate components don’t fall under the new law, and can ship to your door.
Also, legal side note, but importing ammo from out of state will be considered a crime with the new law. They figured people would try and drive it in from out-of-State.