3rd gen with larger tires and/or lifted on STOCK WHEELS

Man I really like that. Would you mind describing any differences in the ride.

 

Ride is a little firmer than stock. Tried to just lift with the billies but it was too stiff actually jarring. It rides nice, the 3/1 kit is well made includes tapered blocks, bump stop spacers, diff drop spacers, front skid drop spacers. I added a carrier spacer and ecgs bearing. No vibes at all now, corners really well with the wider stance with the wheel spacers. My goal is to get fox or king coil overs in the future but for now I'm really pleased with how its turned out. Spec u exhaust is waiting to be installed whenever urd sends me a replacement y pipe and waiting on ov tune to show up.

 

Nice! Thanks for the information. I like the way it looks for sure.

 

It's possible, but the factory OR wheels have the wrong offset and will rub the UCAs.

You need a 4.5" backspaced wheel to make them work with the factory suspension, and even then the fender well liners have to be massaged quite a bit.

 

265/75/16 BFG K02's on 2017 SR with TRD 16 inch accessory wheels.

 

Would wheel spacers fix the backspacing issue of the OR wheels by pushing them farther out?

 

Toytec Boss Lift, Predator Bars, Roll & Lock Cover
TRD Rims with 265/75/16 KM2

 

I have the same set up as you and have no issues

 

It seemed like this truck is completely stock (including the wheels without spacers), which is why I’m wondering how they did this.

 

It probably goes down the highway just fine, but if they turn the wheel sharp or do any wheeling it probably rubs like hell.

 

265/75/16 cooper stt pro on Bilsteins 5160s and 6112s on Dakar leaf pack.

 

4 brand new BFG KO2's 265/70/17. Local pick up only, NJ. PM if interested.

 

got the same suspension setup love mine to, handles very well

 

265/75/16 KO2’s with Spidertrax spacers and 5100 Bilsteins..

 

Did you just do the bilsteins or did you do anything with coils / leafs? Truck looks good, how does it ride?

 

OME kit, 887 with Dakar’s on 265 70 17.

 

Got any side shots?

 

What did you level it with?

 

Truck rides great, better than stock in my opinion. I used the existing coils with the bilsteins. I decided to upgrade all 4 corners to the 5100’s. I haven’t done anything with the leaf springs yet but I’ve noticed the stock leafs are starting to sag a little so I’m going to upgrade them to the OME leafs in the next month or two.