What have you done to your Tacoma today? 1st Gen Edition

That’s really pretty. Any idea how old it is?

 

Hard to see but is on the sign. I think the sign says 1873

 

Van Sant bridge, supposedly the most haunted place in Bucks county

 

Merry Christmas to me!

 

Van Sandt was the first one on the tour, had no idea it was haunted.

We did Van Sandt, Loux, Cabin Run, and Frankenfield.

Also had three creek crossings on the trip as well.

 

https://www.atlasobscura.com/places/van-sant-crybaby-bridge

 

Ha I was just reading this. Also saw this:

And it's funny because we actually saw a red fox at the end of the road.

 

Yeah approximately. I had OME 882’s up front with a wheelers 5 leaf pack in back. It was about 3 up front and 2 in back. I did this with 33/12.5-15 tires

 

Front pinion seal is the seal where the front driveshaft connects to the Differential flange, right?

 

Yeah. Think I am just going to order and new nut and do it right

 

I'd wait and do it the right way. Toyota made that nut a pain in the ass to remove for a reason, lol.

 

No.

 

Sweet! Subbed

 

I got the same shifter 6 months ago. I had to flip the spring in side

 

Emblems getting done, on vacation this whole week

 

I fought with it for an hour, thinking I was just not compressing the spring far enough. I eventually tried it without the spring and it still wouldn't fit! Then I tried filing down the square edges on the lock ring channels, but got nowhere fast. Keeping the original is the way to go on these, I think!

 

Plaster City/Superstition day trip

 

Did a tune up.no plugs came gapped right. Gapped them to .35 as per @Blackdawg . Runs smooth, idles at 750 rpms. Also mounted my antenna on tailgate.

 

I was under the understanding the gap is .45 not .35

 

.35 to .44 from research here. Went for .35 on both electrodes.some came out of the box at .12, crazy.