Show off your aux fuse panels.

Im about to purchase these products my wiring under hood has gotten out of control and now with my amps going in im ready to re wire everything for a clean install like you all.

Question: anyone cut their led light harness to shorten them i have way too much bulk wire in my engine bay from my @CaliRaisedLed bumper light and ditch lights

 

yep, cut them and shorten them. no need to have excess wire all around.

 

Finally got around to installing everything. Took me a while to wire everything up. I was just working on it at night when my daughter went to bed. It has 5 relays tied to fuses. There’s an option for a 6th relay but it’s a weird 4 pin that I haven’t bothered with yet. Thanks @paranoid56 for the custom plate, it worked out perfectly for this relay box.

 

Sub

 

Designed this one to fit my 3rd gen. Had @paranoid56 burn it... turned out great. Will get it bent up and powder coated this weekend. Holds a c/b, 8 circuit mini fuse, and 7 micro relay bank.

 

Nice! I want to do something very similar with a bussman rtmr

 

@paranoid56 has my design, I'm sure he'd be happy to cut more

Bent up and test fit. Clears the crawl control module on the brake booster perfectly


Poswercoated and started assembly. Getting there... Just waiting for my Deutsch connectors.




And my custom switch panel

 

Nice work right there!

 

Here’s mine. Water jet cut aluminum, drilled and tapped to fit everything I need. Powers my fog lights, ditch lights, light bar, compressor, and here’s a main power all the way to the tail light which powers a 12v outlet in the bed and my bed lights.

 

The second circuit breaker is for my amplifier behind the seat for the subwoofer.

 

Thanks

 

Where do you get the swithes? Are the switches rocker or spring switches. Do they illuminate when not engaged. Love the set up, nice and clean.

 

I used OEM switches from Toyota. Plugged right into the blanks in the dash and light up and dim with the dash lights.

 

Thanks

 

Do u sell these yet? What's normally there? I forget.

 

They are on his website. 25 dollars plus shipping. Nothing is there

 

i have the blank ones here.
https://www.paranoidfabrications.co...oma/products/3nd-gen-tacoma-fuse-relay-holder

 

Oops I forgot the majority of @mesojdm post was your bracketry. I should have specified, the switch in the sunglass holder area.

 

Can anyone recommend a good relay holder for my plate? Im thinking of going with the blue sea fuse box but need a relay holder. I have 4 relays.

 

Im running This one It takes micro relays for a smaller footprint, nice and compact. Plus it's a 7-way so you'll have room to expand if/when you add more accessories.
Only downside is that it is surface mounted. But the feet can be flipped upside down for a flush mount style.