Camburg Ball joints Alingment

I just ordered a new 3 inch lift. Radflo coil-over’s and with OME Dakar’s rear leaf pack. I plan on setting the coil-over’s to about 2inch over stock and removing the 3rd leaf down from top on the Dakar’s.
I am getting the new Camburg Ball joints UCA and was wondering if the Alignment will be an issue. I am told the UCA does not have adjustment like the LR UCA. If the caster is built into the UCA what should my #s be at the end?
Toe=0
Camber=0
Caster=2.5
I am running BFG All terrain TA/ko 265/75 16 on FJ cruiser Rims
Please take it easy on me, as I am new to lifting. (I have used the search)

 

I believe the caster is built in to those uca's. No adjustment needed. I've heard 0-toe,0-camber, and 2.5-3.0 positive caster will be good.

 

chris 4x4 alignment specs for a 3" lift: 0, 0 and 2.7

thats whats worked best for him

 

Correct. The CMBG b/j uca add 2* of caster.

 

Thanks for the reassurances, I was thinking I could switch back to LR if needed but the camburg’s seem better.