Lifted on 265's. Show Me!

Any Rubbing?

 

Sorry four the confusion. I realized your tires are bigger. I meant that your set up is what I wanted to know if it worked. Thanks for making sure I understood tho.

 

Sorry four the confusion. I realized your tires are bigger. I meant that your set up is what I wanted to know if it worked. Thanks for making sure I understood tho.

 

3.5 inches of lift up front on 265/70/17 fj wheels. Stock leafs out back with firestone ride rites which when i pump them up put me at about an inch over stock. Truck sits almost level with about half an inch of bro lean lol.. in this pic the bags have less air than normal so its about an 1-1.5 inches of negative rake

 

None what so ever even at full lock an have done no trimming.

 

KO2s

 

3" Rancho Quiklift in the front, OME Dakar full replacement in the rear. 265/75/16 Toyo AT's. I wanted 285's but I got these for $83/tire, so I'll drive them till they're done or I want to pony up for the 285's.

 

~2" lift 264/75r16 OG BFG KOs

 

I like your style. What f/r bumpers are you running?

 

Relentless Fab for both. I got the parts kit and found a local welder-before I had garage/tool access. A friend and I had to rework the front bumper recently, but it's always a work in progress.

 

265/75/16

 

love the look of this, the 265s don't look bad at all. how much lift are you running? have you even contemplated going to 285s or you staying at 265s?? because i might just stay at 265s, cheaper and easier

 

I think short beds can get away with a lift on 265 but not a long bed.

 

265/75r16 KO2s
5100s w/ 884s and progressive leaf pack in the rear. TSB with overload removed.

 

275/65/18

 

Nice choice!

 

Finally got to lifting the truck. Went with the Toytec adjustable coilovers and AAL. Got 1.5 in the rear and 2.75 up front right out of the box and I'm pretty satisfied. I think the 265s still look good. From some angles they look too small, but that's mainly the width. From the side I usually think they look good and appear to fit well. KMC 16x8 with 4.5 bs.

 

New lift. Mall crawlin.

Just checked my CVs and the fins are touching with only 2.5" lift (884s)

Think I'll do the stretch and re clamp method.