2888's

anyone have any "settling" with 5100's set to 0, if so how much, considering going to .85 or using a 1/2" spacer on drivers side and 1/4" on the passenger side.

 

I have the 888's on mine w/2nd gen 1500's set at zero w/ 1/4 in spacer on drivers side for Taco lean. I ended up settling about one inch after a couple months and adding winch bumper w/winch and sliders.

 

Man, these OME coils seem to have a lot of settling. I will be installing a set of 887's on my truck Friday, I hope I didn't mess up not getting the 888's due to settling.

 

Bumping this... Anyone else getting much settling?

 

This is my experience so far with the 887s. I drove 50 miles before taking my initial post lift measurement, just to make sure everything was properly seated. I then put 1500 miles on the truck during a road trip home for Xmas. So far I have seen zero settling. Exactly the same measurement, both taken with a full tank of gas.