3rd gen, stock 265/75/16 wheels spacers

So, searched this forum, couldnt find an answer...

3rd gen trd off road. Simple question, if i put 1.25” spidertrax hub centric spacers with stock 265/75/r16 tires/rims... will it rub against wheel wells ? Thanks

 

I’m going to go with no. on my 2nd gen I ran a spacer with the trd beadlocks and didn’t rub. The trd beadlock had a litttle more poke then the off-road wheel too.

 

Im running .75 BORA spacers, 2" lift, and Toyo OC AT2 no issues. Even on the trails full stuffed/flex plenty of room.

 

Curious about the same thing. Considering this exact same setup. Anybody with any experience?

 

Im also curious. Anybody have experience with this? I have ProComp wheels with 4.5 backspace on 265/75/16 but i plan on adding 1.25" spacers but was wondering if id have issues with rubbing

 

I run Ray10's with 4.3 backspace and 265/70/17 K02s. I put on Spidertrax 1.25" spacers this past weekend, they did rub on the fender liner pretty hard but I just used a heat gun front and back. No rubbing anymore

 

I'm running that exact set up and have rubbing only when I make hard left turns on steeper driveways. I went down Clark's grade in Big Bear and had maybe 5 instances where I rubbed for a quick second. Nothing major tho.