What Have You Done To Your 3rd Gen Today?

Someone posted somewhere -20 to -30 or somewhere in that range? Ontario I believe?

 

Gotcha! My mistake.
I was thinking BakFlip MX4 Trifold.

 

Anything under "0" can be dangerous in a short amount if time if you are not well equipped with good "expensive" clothing. Only go out if you have to!!!

 

I finished sound proofing and installing speakers into all of my doors. The sound difference is night and day. I spent a lot of time sound proofing the front doors compared to the back doors. I might go back in there at a later time and finish sound proofing the back doors to the same standard as my front doors.

I figured I would try my hand at vinyl wrapping my interior dash trim. I tried white plasti-dipping it for the storm trooper look, but it looked like crap from spraying in the cold. I used Goof Off to get it off and it discolored the plastic trim. So now I figure carbon fiber vinyl wrap is an easy way to cover it up.

I think I'll start doing some mods and upgrading my girlfriends Honda Civic eventually. I think think she would appreciate an upgraded sound system or if I sound proofed her doors.



Edit - Turns out vinyl wrapping three dimensional things is harder than it looks on Youtube. $25 of vinyl later and I realized I suck at vinyl wrapping. This is definitely a job for a professional.

 

It's below zero here in Wisconsin but my gauge stopped at zero. Perhaps the taco doesn't recognize below zero?

 

Put my TRD PRO rear end on! Thanks to LostHusker!

 

Added door sill, glove box, and exterior emblem overlays from rrentop. Also installed faux trd pro grill, black mirror cap covers along with black foglight surrounds to get rid of the chrome from the Limited trim, and added carpet clips for the passenger side floor mat.

 

In the last week and a half:

• Mesojdm LED turn signals
• RCI rock sliders
• POPE Overland Expedition Tent

She's almost there

 

+1 on that freezing issue, but love my Revolver. Absolutely no regrets.

 

debadged looks cleaner.

 

Put the new Husky x-acts in and a phone mount with the Hondo Garage mount, super sturdy.
Little dirty already but really like the texture and fit

 

Can you post a pic of the passengers side front please? I've had Weathertec before and these look more rugged. The OEMs work but......

 

Blacked out the badging today. Actually hit close to 60 in WA today so took advantage of it. Also UPS dropped of my new OEM TRD 17" rims. Cant wait to get them installed.

 

I'm going to put one on my next truck and I'll just leave it closed during winter.

 

Passenger side.

 

Got mine put on today. I think the only chrome I have left is the Toyota emblem on my steering wheel.
Also popping off the mirror cover was super easy. The install also super, brainless easy.
Added door jam bling too. I keep thinking I’m done with mods......
Before and after on the blinkers...

 

Thank you very much! Looks like this one won't creep up like the OEM does.

Also looks like there's enough of an edge along the left side for clips if it did, although I bet you could add enough Velcro hook on those flat areas to stop it too.

 

Nice job @SurfratTX !

 

First Post!
Busy weekend:
Icon front coilover (factory preload), RXT rear (Option 2) with compression adjustment, Icon Tubular Delta Joint UCA
(Note the ghetto bungee strap holding up the reservoir. Now secured to the frame)

 

Wow, what an introduction!

Welcome to the forum!