1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What Have You Done To Your 2nd Gen Tacoma Today?

Discussion in '2nd Gen. Tacomas (2005-2015)' started by kwalton, Feb 2, 2008.

  1. Dec 31, 2017 at 5:21 PM
    ahightower

    ahightower Well-Known Member

    Joined:
    Mar 3, 2015
    Member:
    #150021
    Messages:
    174
    Gender:
    Male
    DFW
    Vehicle:
    PreRunner DCSB
    Thanks again. I had not started on trip A, bet that’s why it didn’t work.
     
  2. Dec 31, 2017 at 6:19 PM
    j_sav115

    j_sav115 Well-Known Member

    Joined:
    Feb 16, 2016
    Member:
    #178429
    Messages:
    1,046
    SC
    Vehicle:
    07 Silver TURD SPRT
    Getting to start all over :)
    Got her fresh and clean.

    IMG_20171231_181633032.jpg
     
    DAHOGGS44, zh137dz, Jckdnls and 5 others like this.
  3. Dec 31, 2017 at 7:57 PM
    Uki Monstah

    Uki Monstah Well-Known Member

    Joined:
    Dec 21, 2016
    Member:
    #205440
    Messages:
    100
    Gender:
    Male
    First Name:
    Richmond
    Maui 808 state
    Vehicle:
    2013 pyrite mica 4x4
    Performance: K&N cold air intake Flow master Duel exhaust Looks : Wet okole seat covers N-fab side steps 3" lift -bilsteins all around, OME coils, ICON uca, rear add a leaf spring Stealth custom series sr8 wheels wrapped with BFG Ko2 275/70/17
    Is that new lense or just the bulb?? Looking to do the same since mines looks like yours all fogged out
     
    poyota2015[QUOTED] likes this.
  4. Dec 31, 2017 at 8:48 PM
    Cativelense

    Cativelense Well-Known Member

    Joined:
    Oct 12, 2015
    Member:
    #166443
    Messages:
    23,536
    Gender:
    Male
    First Name:
    Nuno
    CT
    Vehicle:
    2014 DCSB Black 4x4 TRD Sport
    -TRD oil cap -TRD radiator cap -TRD shift knob -2015 Entune system with Nav, -OEM roof rack -Front windows tinted to match back (20%) -BPK Skid Plate -Non clock hazard switch assembly -WeatherTech floor mats -AFE Stage II Pro Dry Intake -AVS Vent Shades -AMP Research bed extender -Horn relocation mod -Bob's Mirror -Redline hood struts -UltraGauge MX 1.3 -Debadged -Reverse LEDs & shifter bezel LED -Black steering wheel controls, black shifter bezel, black AC vent panel -Black gauge cluster rings + black tweeter rings -Morimoto XB LED fog lights -Anzo tail lights -Hilux 4x4 lighted switch -Bed mat -Hondo Garage radio knobs -OKLED 20" light bar mounted on BAMF behind the grill mount -CH4X4 LED light bar switch w/add-a-fuse -nd4spdbh fog light anytime mod (HUGE thanks to @tgriff) -Debadged bed -Secondary air pump filter -Retros (Morimoto Mini H1's and Morimoto Panamera shrouds with dual intensity LED DRL's & 5000k bulbs) -Tailgate Anti-Theft Device by @scleaf -OEM TRD Sport 17" wheels painted black w/Bridgestone Blizzak DM-V1 tires (Winter wheels) -Pro Comp Extreme 17" wheels w/Firestone Destination LE2 tires (Spring/Summer/Fall wheels) -Anzo blacked out third break light -HomerTaco Tacoma Ghost Raptor Insert -Rear diff breather mod (HUGE thanks to @jc11taco89) -Fumoto Valve -LEER 100R -Salex center console and glove box organizers -Power Pop N Lock -Mobtown Tailgate Skin -TRD Pro suspension with HS Progressive AAL (overload leaf in) -ECGS replacement bearing -Dust caps on rear drums to match front -Me-So Customs "The Gasshole" -ACEkraut license plate bracket -mesojdm's 2nd Gen Ultimate LED Dome and Map lights -Seat spacers from olecoot -Bullaculla Trailer Harness Relocation Bracket
    It's the whole thing. Meaning, LED bulb and housing. Remove the stock assembly and put in the Morimoto one.
     
  5. Dec 31, 2017 at 9:03 PM
    stizo

    stizo Well-Known Member

    Joined:
    May 3, 2015
    Member:
    #154500
    Messages:
    341
    Gender:
    Male
    First Name:
    Mike
    Roseville, CA
    Vehicle:
    15 DCSB TRD Sport 4x4
    Nothing. Bought crap from Ikea. Parts waiting to be installed were put on hold by the better half. Lol
    20171231_160539.jpg
     
    Last edited: Dec 31, 2017
  6. Dec 31, 2017 at 9:44 PM
    Uki Monstah

    Uki Monstah Well-Known Member

    Joined:
    Dec 21, 2016
    Member:
    #205440
    Messages:
    100
    Gender:
    Male
    First Name:
    Richmond
    Maui 808 state
    Vehicle:
    2013 pyrite mica 4x4
    Performance: K&N cold air intake Flow master Duel exhaust Looks : Wet okole seat covers N-fab side steps 3" lift -bilsteins all around, OME coils, ICON uca, rear add a leaf spring Stealth custom series sr8 wheels wrapped with BFG Ko2 275/70/17
    Nice probly do the same to match my headlights
     
    Cativelense[QUOTED] likes this.
  7. Dec 31, 2017 at 10:43 PM
    Twizted

    Twizted 1GR FE

    Joined:
    Jun 20, 2014
    Member:
    #132313
    Messages:
    8,611
    Gender:
    Male
    First Name:
    Rob
    America
    Vehicle:
    '15 DCLB TRD Locked 4WD & '17 Tundra DC SR5 TRD Offroad
    stock af, but hover if you think you disagree... RV living: Vagabond Drifter (6' bed) Custom bed cabinet buildout 175w Renogy solar panel 40a Rich Solar MPPT solar controller 1000w Wagan Pure Line inverter Lavaner Pro 2kw diesel heat exchanger Suspension/wheels: Toytec Aluma 2.5 front shocks with resis 13x700 coils (soon 14x700) Toytec Aluma 2.5 rear shocks SPC UCAs Deaver Stage 3 rear leaf springs Wheeler's 3 degree axle shims Wheeler's U-bolt flip Wheeler's Super Bumpstops 18"x9" XD Monster (x5) 275/75/18 Cooper ST MAXX (x5) EBC Stage 3 pads/rotors Electronics: Kenwood DNX773S iDatalink - Maestro RR Stubby Antenna No-name Switchback LEDs Hella Sharptone horns (no relay) Relocated backup camera w/DIY bracket Armor/recovery: BruteForceFab Rear HC w/swingout BAMF Sliders (DOM, 10 degree w/kick out, rattle-canned) BAMF IFS Skid (BAMF powder-coated) BAMF Mid Skid (BAMF powder-coated) BAMF TC Skid (BAMF powder-coated) BAMF LCA Skids (BAMF powder-coated) BAMF Rear Diff Skid (early model, powder-coated) BAMF CMC Plates US Offroad Winch Bumper Smittybilt X20 10k synthetic rope winch Total Chaos Bed Stiffeners ARB compressor w/air-up kit DIY cowl snorkel ARB rear air-locker Interior: Husky Floor Liners (F&R) Rear 40% seat-delete Hinged fridge platform in place of rear seat Exterior: CaliRaised Low-profile Ditch Light Brackets CaliRaised Side-projecting LED pods CaliRaised Faux TRD Pro Grille Morimoto amber LED fog lights One-of-a-kind 1GRFE plate (second iteration) Removed: OEM Bed Mat CaliRaised bed molle panels
    Bought goodies to hoist/store the RTT & bed rack.

    20171231_220041.jpg
     
    LamzTaco, Foxtato, TomTwo and 2 others like this.
  8. Dec 31, 2017 at 10:44 PM
    Twizted

    Twizted 1GR FE

    Joined:
    Jun 20, 2014
    Member:
    #132313
    Messages:
    8,611
    Gender:
    Male
    First Name:
    Rob
    America
    Vehicle:
    '15 DCLB TRD Locked 4WD & '17 Tundra DC SR5 TRD Offroad
    stock af, but hover if you think you disagree... RV living: Vagabond Drifter (6' bed) Custom bed cabinet buildout 175w Renogy solar panel 40a Rich Solar MPPT solar controller 1000w Wagan Pure Line inverter Lavaner Pro 2kw diesel heat exchanger Suspension/wheels: Toytec Aluma 2.5 front shocks with resis 13x700 coils (soon 14x700) Toytec Aluma 2.5 rear shocks SPC UCAs Deaver Stage 3 rear leaf springs Wheeler's 3 degree axle shims Wheeler's U-bolt flip Wheeler's Super Bumpstops 18"x9" XD Monster (x5) 275/75/18 Cooper ST MAXX (x5) EBC Stage 3 pads/rotors Electronics: Kenwood DNX773S iDatalink - Maestro RR Stubby Antenna No-name Switchback LEDs Hella Sharptone horns (no relay) Relocated backup camera w/DIY bracket Armor/recovery: BruteForceFab Rear HC w/swingout BAMF Sliders (DOM, 10 degree w/kick out, rattle-canned) BAMF IFS Skid (BAMF powder-coated) BAMF Mid Skid (BAMF powder-coated) BAMF TC Skid (BAMF powder-coated) BAMF LCA Skids (BAMF powder-coated) BAMF Rear Diff Skid (early model, powder-coated) BAMF CMC Plates US Offroad Winch Bumper Smittybilt X20 10k synthetic rope winch Total Chaos Bed Stiffeners ARB compressor w/air-up kit DIY cowl snorkel ARB rear air-locker Interior: Husky Floor Liners (F&R) Rear 40% seat-delete Hinged fridge platform in place of rear seat Exterior: CaliRaised Low-profile Ditch Light Brackets CaliRaised Side-projecting LED pods CaliRaised Faux TRD Pro Grille Morimoto amber LED fog lights One-of-a-kind 1GRFE plate (second iteration) Removed: OEM Bed Mat CaliRaised bed molle panels
    ...oh yeah, I also adjusted my headlights down a bit.
    Hoping to only be flashed by boobies now, not oncoming traffic.
     
  9. Jan 1, 2018 at 4:59 AM
    308savage

    308savage Well-Known Member

    Joined:
    Mar 6, 2016
    Member:
    #180389
    Messages:
    4,862
    Gender:
    Male
    First Name:
    Adam
    East Tennessee
    Vehicle:
    2012 Tacoma TRD Sport DCSB
    Leveling kit, roll bar
    What’s that black piece of metal below your bumper beside your hitch?
     
  10. Jan 1, 2018 at 6:18 AM
    Pro Taco 11

    Pro Taco 11 Sitt Head

    Joined:
    Mar 13, 2012
    Member:
    #74849
    Messages:
    880
    Gender:
    Male
    First Name:
    Rob
    Joliet, Illinois
    Vehicle:
    Tacoma TX Pro 2011 4x4
    3" OME, RAAL, TRD Exhaust, Pioneer DBL DIN, Weather Tech's, Bull Bar, AFE CAI, Anytime Fog, Map/Dome light mod, Ultra Gauge, Tail Gate theft mod, Second Set of D-Rings in bed, Dura Tracs 285's, Satoshi deep dish, Leer 100 XQ, Wet Okole seat covers

    Airport Rescue?
     
  11. Jan 1, 2018 at 6:19 AM
    buyobuyo

    buyobuyo Read The Fucking Manual

    Joined:
    Jan 24, 2008
    Member:
    #4417
    Messages:
    6,291
    Gender:
    Male
    First Name:
    Jeremy
    Camden, AR
    Vehicle:
    08 PreRunner SR5, I4, Manual, Silver
    A thing or two...
  12. Jan 1, 2018 at 7:13 AM
    308savage

    308savage Well-Known Member

    Joined:
    Mar 6, 2016
    Member:
    #180389
    Messages:
    4,862
    Gender:
    Male
    First Name:
    Adam
    East Tennessee
    Vehicle:
    2012 Tacoma TRD Sport DCSB
    Leveling kit, roll bar
  13. Jan 1, 2018 at 7:32 AM
    Karate1993

    Karate1993 Well-Known Member

    Joined:
    Feb 25, 2014
    Member:
    #123999
    Messages:
    258
    Gender:
    Male
    coloRADo
    Vehicle:
    '14 TRD Off-road DCSB
    Looks almost identical to what I did at my last house. It worked great!20161030_142459.jpg
     
    Brindybot, LamzTaco, Foxtato and 9 others like this.
  14. Jan 1, 2018 at 7:39 AM
    Jckdnls

    Jckdnls Roads less explored

    Joined:
    Apr 27, 2017
    Member:
    #217530
    Messages:
    3,626
    Gender:
    Male
    First Name:
    John
    Spicer, mn
    Vehicle:
    93 3.0 v6 sr5 5spd 08 ac or 6sp
    Dakar torsion bars
    Kuntrykid likes this.
  15. Jan 1, 2018 at 7:53 AM
    Twizted

    Twizted 1GR FE

    Joined:
    Jun 20, 2014
    Member:
    #132313
    Messages:
    8,611
    Gender:
    Male
    First Name:
    Rob
    America
    Vehicle:
    '15 DCLB TRD Locked 4WD & '17 Tundra DC SR5 TRD Offroad
    stock af, but hover if you think you disagree... RV living: Vagabond Drifter (6' bed) Custom bed cabinet buildout 175w Renogy solar panel 40a Rich Solar MPPT solar controller 1000w Wagan Pure Line inverter Lavaner Pro 2kw diesel heat exchanger Suspension/wheels: Toytec Aluma 2.5 front shocks with resis 13x700 coils (soon 14x700) Toytec Aluma 2.5 rear shocks SPC UCAs Deaver Stage 3 rear leaf springs Wheeler's 3 degree axle shims Wheeler's U-bolt flip Wheeler's Super Bumpstops 18"x9" XD Monster (x5) 275/75/18 Cooper ST MAXX (x5) EBC Stage 3 pads/rotors Electronics: Kenwood DNX773S iDatalink - Maestro RR Stubby Antenna No-name Switchback LEDs Hella Sharptone horns (no relay) Relocated backup camera w/DIY bracket Armor/recovery: BruteForceFab Rear HC w/swingout BAMF Sliders (DOM, 10 degree w/kick out, rattle-canned) BAMF IFS Skid (BAMF powder-coated) BAMF Mid Skid (BAMF powder-coated) BAMF TC Skid (BAMF powder-coated) BAMF LCA Skids (BAMF powder-coated) BAMF Rear Diff Skid (early model, powder-coated) BAMF CMC Plates US Offroad Winch Bumper Smittybilt X20 10k synthetic rope winch Total Chaos Bed Stiffeners ARB compressor w/air-up kit DIY cowl snorkel ARB rear air-locker Interior: Husky Floor Liners (F&R) Rear 40% seat-delete Hinged fridge platform in place of rear seat Exterior: CaliRaised Low-profile Ditch Light Brackets CaliRaised Side-projecting LED pods CaliRaised Faux TRD Pro Grille Morimoto amber LED fog lights One-of-a-kind 1GRFE plate (second iteration) Removed: OEM Bed Mat CaliRaised bed molle panels
    Yeah, no kidding!

    I assume that's the 440lb Harbor Freight model too... How was it lowering down at the abrupt release of the hoist? That's been my only real concern, since I'll be removing the RTT with the rack.
     
    Kuntrykid likes this.
  16. Jan 1, 2018 at 8:06 AM
    JdevTac

    JdevTac Well-Known Member

    Joined:
    Jan 8, 2012
    Member:
    #70234
    Messages:
    6,277
    Gender:
    Male
    First Name:
    Josh
    GA/WA
    Vehicle:
    2nd gen
    Failure from a properly installed recovery hitch with a shackle?

    I know people advise against hitch pin+chain/strap (and to never attach recovery items to a hitch ball) and the like but have never heard of any problems from a recovery hitch.
     
    FIRE74, TacomaJack099 and Kuntrykid like this.
  17. Jan 1, 2018 at 8:16 AM
    TaKoToy

    TaKoToy Well-Known Member

    Joined:
    Jul 16, 2013
    Member:
    #108417
    Messages:
    3,916
    Gender:
    Male
    First Name:
    Robbie
    Prince George VA
    Vehicle:
    2013 4x4 OffRoad, 2020 cement DCLB OR
    Mostly stock
    Got this done! Viair constant duty air on the prinsu rack. I can't tell you how many times I haven't aired down because of how long it took me to air back up with my old pump buried in compartment below seat usually with tons of gear on top of it.20171229_141829.jpg
     
  18. Jan 1, 2018 at 8:21 AM
    boogie3478

    boogie3478 Well-Known Member

    Joined:
    Oct 12, 2014
    Member:
    #140179
    Messages:
    26,395
    Gender:
    Male
    Vehicle:
    14 TRD Off-Road V6
    All the mods
    Got a link to that box?
     
  19. Jan 1, 2018 at 8:32 AM
    HIghlande2

    HIghlande2 Well-Known Member

    Joined:
    Apr 20, 2017
    Member:
    #216802
    Messages:
    1,628
    Gender:
    Male
    First Name:
    Chris
    Wilmington, NC
    Vehicle:
    15 DCSB Sport
    Little of this and a little of that
    Wasn't today but I installed the tool and Hi Lift mounts from the DYI section and painted and installed a pair of the Oregon Rack corner brackets.
    20171230_134118.jpg
    20171230_134155.jpg
    20171230_122529.jpg
     
    Yota Man, toysrgood, ausfahrt and 6 others like this.
  20. Jan 1, 2018 at 8:44 AM
    TaKoToy

    TaKoToy Well-Known Member

    Joined:
    Jul 16, 2013
    Member:
    #108417
    Messages:
    3,916
    Gender:
    Male
    First Name:
    Robbie
    Prince George VA
    Vehicle:
    2013 4x4 OffRoad, 2020 cement DCLB OR
    Mostly stock
    TomTwo likes this.

Products Discussed in

To Top