2017 Tacoma leveling settings with bilstein 5100

Curious what I should set the belstein 5100 at? I’ve been seeing .85?

 

Yep. First notch. The stock front is about an inch lower than the rear.

G.

 

This instruction sheet is for 3rd Gen Tacoma 5100s.
2nd Gen Tacoma 5100s are .85 inch at 2nd notch from what others are saying.

 

Thanks. Any idea what recommended setting for 3rd gen?.65?

 

I’m at 1.1” no lift in the back and it runs level

 

^^^ same here

2017 dcsb sport. I did the 3rd notch on gen 3 5100 billys and stock springs. The front is a half inch higher now (before 5100's front was 1/4in lower then rear)

slight rake but it should settle a little more.

 

Did yours settle to level bro? I picked up my truck yesterday and already have the 5100’s on the way lol

 

I know this is an old post but do you still have this set up with bilsteins up front at 1.1”? Did you end up putting an AAL or lift block on the back?

 

What’d you end up doing man? 1.1” up front?