What Have You Done To Your 2nd Gen Tacoma Today?

Anyone have experience with the locking rotopax handle? Mine locks and secures the rotopax canister. But the top piece of the handle does not spin freely from the lower portion at the top. Here's a pic of the top piece spinning free which mine is not doing.

 

I need to find a place to wash it.

 

Started the year off on the right foot by winching a crashed car out of a cyclone fence. The elderly couple was still inside.

 

Or you can post it in the super white thread

 

Cool I bet they appreciated that

 

Had some fun with the extra jerry cans for the truck. Here are some before and afters.

 

Those are what they call SAW cans. I think they are slightly bigger than the 50 cans. I wanted to make sure they rested on the raised tire well. But they are secured to the bed rail with washers and bolts. Bolt head sits in rail with 1in washer locking it to the rail, then a couple washers inside with a crush washer and nut. I dreamed took the front plate for the eye ring and the lock it with a master lock. On securely and I hold tools and ratchet straps in one and fuel nozzles and rags in the second. I think for locks, can and washers I made one nice lock box for $30.

 

Gave her the 1st bath of the year.

Also installed the cali raised led ditch lights yesterday.

 

Installed my TRD headrest patches...tooo freaking cold to wash today.HAPPY NEW YEAR y’all!

 

No but I'm not shocked that a rotopax product has failed again. They continue to make money off the expo crowd though

 

Yeah I've seen some mixed reviews on these things. I plan on oiling the lock on a weekly basis.

 

Anyone know if you can reset the maintenance required light BEFORE it comes on.... mine isn't synced up to when I do maintenance and it's annoying

 

Easy and clean??

 

I need to do the same thing the dealer told me to just bring it in and they can enter it manually so it's correct

 

Only with Fumoto!

 

As an elderly, I thank you.

 

Dang that's like steroid muscle!

 

Is this just in place of using the rubber hose? Haven’t changed the oil yet but plan on it this week..

 

The fumoto replaces the drain plug, allowing for controlled release (that's what she said) of the oil when draining. The fumoto valve drains straight down or you can use a supplied tube and run that directly into your waste pan. Here's the one I have: http://amzn.to/2CCOZha