toytec front top plate spacer

i have a new never installed toytec top plate spacer that i forgot to install. instead of taking everything apart to put it in, i saying to hell with it and selling it. $20 shipped.

 

1/4"?

 

x2 Ill take it if its 1/4

 

its 4 bolts you take off to put it on...

 

shhhhhhhhhh

 

oppp

 

yes its the 1/4" spacer, P/N TP14 i believe.

 

Im a noob. What is it for?

 

You have to take off the wheel, then the 3 top nuts and the 1 bottom mount bolt, and most people have to remove the 2 bolts holding the LCA to the ball joint on the spindle to lower the shock/spring assembly low enough to get the spacer over the 3 studs on the top.

 

Goes on top of the front coilover assy, its good for an extra 3/8-1/2" of lift in the front.

 

With any lift at all, the drivers side is lower than the passenger side due to the weight of the battery, gas and driver. A lot of people are putting a small spacer on the drivers side to level off the truck side to side.

 

Yea, my truck is level on the passender side, but it has the factory rake on the drivers side. Its annoying so I bought this and i hope it will be fixed