Scs Ray10 wheels on white 3rd gen

Yeah that’s the SCS song I’m hearing. I got lucky, I checked the other day while in the deer stand just to see and they had them in stock. I ordered as fast as I could. Once I received confirmation email I went back to the website and they were sold out. I ordered the last 4...
Anyways, Are you experiencing any rubbing with these tires at all?

 

Just a little bit if I am turning and hit a bump just right. Like turning into a parking lot. It rubs the little plastic table on the fender flare. Never rubs the body mount. I'm still running the factory upper control arms. They did not rub at all until my lift settled some. I could knock off that little tab but it only happens like two times a month so I never worry about it.

 

*wipes sweat from forehead* I want 285’s but no CMC so that’s great news! And one last question... Stock UCA’s? Thanks for being so helpful!

 

Yeah I running the stock upper control arms. When you change them to the light racing or another similar type, they can change the caster and it moves the wheel a little when you turn the wheel, which can make it not rub.

 

Ok great. I’m running the OME setup but now ordering the 2888 to replace the 2887 I have now and am ordering 285 Duratracs. Hopefully I clear like you do! Thanks for all the info.

 

Would you happen to know your center hub to fender measurements?

 

I’m hoping to grab a set of matte bronze next week but I’m not yet ready to lift. I’m on stock suspension running 265/75/16. Does anyone have pics running Ray10’s (or other 4.00” bs & -12mm wheels) on stock suspension? I am afraid the wheels will be too far outside the fenders for my taste (when not lifted). Also, will the lower offset create any rubbing issues?

 

Here you are

 

Anyone handy with photoshop? Want to visualize matte dark bronze ray10s on cavalry blue

 

Why are you changing 887s for 888s? If you don't mind. More lift?
I have 887s and hoping to fit 285s on Ray10. Just don't want any rubbing cause I do light off roading and sometimes flex it quite a bit.

 

Yeah the 2888 coils end up with about .5’’ more height. I just wanted my truck to sit more level. Here’s my truck with the 2888 coils and 275’s on brushed copper Ray10’s

 

Love your setup. That's exactly what I'm after. Did you have to do CMC?

 

very nice

 

Here is mine. I'm old school with black SCS.

 

damn, can't tell if bronze or black would be a better option

 

Anyone with matte gray? On white 3rd gen

 

Very sweet !!!!

 

2016 with matte gray Ray 10's at your request

 

Did you paint your "bead lock" bolt heads?