Norcal Spotted and BS Thread

@jqueener and oh yeah, just looked, there's no way the jumpers on the Viar are more than 10.

 

i just got some fancy Ray10s and want to put 255s on them. i need to get a short term fix until i have the $$ for new rubber. (read: rock the spare)

now that my Icon is busted i'm thinking about BAMF rear shock relocate and some Kings.

i just ordered the BAMF shackle hanger and i'm oogling All-Pro expo leafs.

all these first world problems!!!

 

I can loan you a non-resi version of the same shock for a bit in the meantime. My spare set.

 

condition/pics?

 

anybody know of a terminal power block that you can bolt things to kinda of like this but for ring terminal leads?

$16 Raptor R5BT048P PRO SERIES - Positive Battery Terminal

https://www.amazon.com/Raptor-R5BT0...eywords=positive+battery+terminal+power+block

 

why not buy a terminal post like that and run an aftermarket accessory fuse panel?

 

nice, thanks. i'm not sure what my plan is but i'll add this to the options.

 

$11 Fastronix Military Spec Battery Connectors- Negative Terminal

https://www.amazon.com/gp/product/B0052617D6/ref=oh_aui_search_detailpage?ie=UTF8&th=1

$11 Fastronix Military Spec Battery Connectors- Positive Terminal

https://www.amazon.com/gp/product/B005260K2A/ref=oh_aui_search_detailpage?ie=UTF8&th=1

 

Lol. I met paul. Nice guy. He is even hookin me up with longer springs since he had a set layin around

 

something like that, i only have like 3 leads, just hate how they are all stacked together. Just looking for something a lil cleaner


here we go!!

https://www.ebay.com/itm/2-X-Univer...inal-Clamp-Clip-Brass-Connector-/191879314113

 

Different market, they come from the Raptor scene and are building themselves up as a full service racing fab and shock service shop, mostly geared towards high speed stuff.
They actually have a good relationship with Greg next door at R&R

 

since these will be sitting in my living room for some time, i put a coating of Jet Seal so they are easy to dust.

 

$200

@SCRunner12 has first crack at em (afterall he bought them brand new ). Then you're next.

 

Doods, check this out. Ace hardware, 6 point metric sets. There are seven right here. I'll grab them all if there's interest.


This is American River Ace, Orangevale near Folsom and Fair Oaks (Sac)
@Fernando @jqueener @t.hornstra

 

those would work . there like 4awg. A bit over kill.

10awg is good for 30 amps but with DC voltage on longer runs you want a lager size because of voltage drop. There is charts for this and Viair has a recommended size chart as well. Just fuse it correctly so the fuse blows before wire melts and dont worry about it. but under size wire will get hot or blow a fuse. its easy to run a hot to the back,and ground to frame so that's not alot of wire. I ran 10awg been fine fuse seems to hold. but the chart said min 8awg for the lenght i ran. there is a little voltage drop but im still above 12v at the compressor so good in my book.

 

17 x 8.5, can you tell me the backspace and offset for these wheels.

 

4.30 bs -10 offset

 

Glen you let me down on that question. I thought electricians are smarter then that.
it,s on the web site.