Questions on running 295/55R20

Thanks

 

Thanks for your help... I was going off the Nitto Tire site on the 305/65/18 ridge grappler.
https://www.nittotire.com/light-truck-tires/ridge-grappler-light-truck-tire/

I most likely will go with 17's though I am still researching if they actually make a leveling kit for the TRD Pro to raise it up just a little bit to allow for bigger rims/tires.

 

Go here and call Marie. She will get you what you need. Very reputable here on TacomaWorld.


https://www.headstrongoffroad.com/contact-info.html

 

Thank you, I sent them an email as their website says their office is closed until 08 Jan.. Hopefully she will get back to me next week.

 

She will. She is awesome!!

 

Hopefully she has some ideas on the level kit, cant seem to find any lift companies that offer one for the TRD Pro...

 

Comment on this guys Youtube video. He has a leveled 2017 and 2018 TRD Pro.
https://youtu.be/l1r7WSxshoo

 

https://www.tacomaworld.com/threads/20x10.322331/

 

Thanks so much.. I went in and commented on his video.. That's a gorgeous truck. After seeing his stock wheels with bigger tires, It made me want to keep mine.

 

Yeah! Those wheels and tires are hot!! Definitely keepers.

 

I have e 295/55/20’s in my truck I will post more detail later. Minor rubbing

 

I found a place that is going to do a 2.5” level kit on my TRD Pro. I wanna say I can put 285/75/16 on after that. That is a 33” tire and about 11.5” wide. Do you think that would fit??

 

You’ll be fine. I have 2.5 level on mine and I’m good. I run 285/75R16 Cooper STT pros.

 

Have you had any rubbing?

 

Nope!

 

Ok as mentioned tire size above 5.5 backspacing. The tires and rims came with the truck when I purchased it. They are fuel hostage wheels, would like to move to 17” wheels but the cfo really likes those so I’m stuck for awhile. I recently installed ome lift with 888 springs and a standard Dakar leaf pak. The truck had a leveling kit on it before but I wanted a little more so that’s how the new lift along with light racing uca’s were installed. The tub only happens when I go through a avaerage dip going forward and now rubs when I turn sharp going backwards. Need to loom into the cmc but haven’t crawled under to look at details. I know others have done it but pics of it are little to none found unless I am missing the holy grail of 3rd gen cmc’s thread Lol.

 

I just read through the BAMF CMC DIY thread. I have a friend with a welder, I'll probably tackle it during a weekend at his house. I'm going with 285/75/16 Pirelli MTs on 16x8 something with zero offset.

 

If you don't mind please post up pics of the work that is done, would like to have a visual of this before trying to tackle it.

 

No problem. I don't imagine i'll have it done before mid February, however. Work will be keeping me pretty busy until then.

 

If your only running that size tire and have a lift, you don't have to CMC with 0 offset wheels and 285’s. That’s exactly what I have and I’m clear. No rubbing at all.