What have you done to your Tacoma today? 1st Gen Edition

surely there is a term that describes the opposite of "glamping"

 

But there so uncomfortable after so long lol

"cramping?" the only real downside to a hammok is those jackasses who either flip you out of it. Or tie a rope around you so you can't get out lol

 

Here ya go. Find a manufacturer to create out of Australia and it's gonna be game over. Scale up from there and create a monopoly.

Google trends for "rooftop tent".. interest has nearly/more than doubled since 2013

 

I hope that's a percentage and not units sold cause the one person in Germany is lonely

 

Interest by region
See in which location your term was most popular during the specified time frame. Values are calculated on a scale from 0 to 100, where 100 is the location with the most popularity as a fraction of total searches in that location, a value of 50 indicates a location which is half as popular, and a value of 0 indicates a location where the term was less than 1% as popular as the peak.


Note: A higher value means a higher proportion of all queries, not a higher absolute query count. So a tiny country where 80% of the queries are for "bananas" will get twice the score of a giant country where only 40% of the queries are for "bananas".

Not sure I like the way they score this.

 

I'll pass

DeTour-59.jpg by Monte Nickles Photos, on Flickr

 

I didn't say it was the best option just a cheaper one Monte lol if we went camping together I'm joining you especially if it snows like that

 

Good thing it started though. Also I would measure the dip stick but I used my A340F trans
I put in about 7 quarts excluding the one quart I put into the torque converter.

Actually I think it was 9 in total but it’s been a while since i did it so don’t take my word for it

 

I ordered a new dipstick assembly from Gunny, he did tell me they were different. It'll be here Wednesday lol

 

Wow, I feel dumb. The reason why the shift interlock wasn't working was because my foot wasn't on the BRAKE

Well at least I got practice re-pinning a connector. Ouch.

 

D'oh!

 

haha damn.

 

Seriously, I did all that work for nothing. I even messed one of the pins up so I had to cut and re-solder a new one.

Well, onto the instrument cluster. If I can't get this thing rolling I can at least wire up my 4HI 4LO lights.

 

I'm sure we've all hit that issue before.

 

IS THere anything that can’t be done to stop my radio From getting static when I flip my pods on?
I understand, kinda, what causes it and what not. Just something I’ll have to live with?

I’ve done some research and it seems that’s bad the case but maybe you guys are smarter than the average person.

 

Check your grounds.

 

I’m pretty sure it’s happens with all led bars/ pods. Only happens on the weaker stations because the bars RFI is greater than the stations.

(I’m sure I said that wrong, I don’t know what RFI stands for or the correct terms that go with it)

 

It seriously looks like a dog took this picture!