dirty deeds' deeds, done dirt CHEAP! and dirty vibes

And where were these 2/3 tars you were going to sell me then?

 

"1/2-way" to where they are no longer effective as a mud tire....ie, 2/3rds tread. I suspect when they reach 1/3rd, while still being legal tread, they would be less than effective in mud.

Oh well...They're sold...less than 10 minutes after I listed them on CL.

Will be replacing AGAIN probably around fall...When I get fender flairs and go to 35's.

 

Glad you sold em

 

Isn't a cab mount relocation recommended as well for 35's?

 

Mandatory....at least a major chop....full on relocation for 37's.

Already done by DYF. Everett did a CMC that's left plenty of room. 33's clear cab mount by almost 3". Must be done prior to 33's....

I've had 35's on my truck with 2 different offset rims just to try em. Cleared with flying colors. Just need flavors cut.

 

My recommendation is mcneil
I have fiberwerx only because mcneil hadn't made fenders for me at that time

 

Dents can be pulled from steel, not fiberglass. Also cheaper

 

Never mind
Quick google search shows they are punched steel
Neat. Still don't make larger ones in steel that I can find

 

Next time I'll be more generic and say metal

 

They don't need to be bigger for bigger tires, just cut. That's what Bill is saying

 

Ah
I thought he was saying bigger
Lol

 

Phukke spell check....."Flavors"? Should read FLAIRS

And yes, CUT fenders and flairs.... I will be doing Bushwacker flairs when crossing that bridge....

 

Buying a new cold weather sleeping bag and some LED replacement lights for the truck. Love seeing the discount still!!!!

 

What kinda lights mane?

 

Reverse and license plate bulbs

 

Good job!!!! ​

 

Eh. Blind af in daylight, getting harder to see while backing up at night.
Hope the LED reverse bulbs don't blow donkeys. Just because they appear brighter looking at them and make the claim, doesn't mean they help to see any better over a distance.
(Read the shit outta this thread) https://www.tacomaworld.com/threads/gy6-35-hir-921-reverse-light-upgrade-vs-high-power-leds.474996/

 

Meh, mine are brighter.
​

Read it, rather not twice lol.​

 

Good, when you wire them you can help me fix my gom of a mess I have. I want to add back lights under my RTT as well. Even more wires in the making!!

 

It was a good read, and it makes 100% sense what he says.

Now, I need to put my fogs back in with the sweet yeller bulbs I have since my Silverstars blew up from water getting in them. I put a silicone bead around the area where the lens meets the body of the housing just in case, pretty sure it came in through the the bulb hole anyway.

Some time before LBL in March;
Wiring and switch for bed side lights
Wiring and switch and mount rock lights
Oil change
Install ditch light brackets (trim cowl if needed, Rago can't give a straight answer for shit)
Wiring and switch for ditch lights

Eventually I'll drop the rear bumper off again and get around to a better investigation of flush mount lights in it. Severely limited on mount locations and light types due to the pounds of bracing steel inside it lawl!