Keystone State Thread

I’ve noticed lol. The lift settled too, my buddy has a 2016 DC Sport with the same tire size and his sits higher. We put the lift on the same day. I noticed when I parked next to his a year and a half later. Probably due to the TRD shocks being softer. Oh well.

 

Cool man, maybe I’ll see ya around. Doesn’t Horsham road run thru or to Hatfield?

 

Hay Aztec taco welcome to the hood. ..
Bethlehem here.

 

YOU!!!!!

I keep seeing you on 611 at Edison Furlong. AND I WAVE EVERY TIME...

Edit: alright. To be fair I’ve seen you three times at the same intersection. But I’ll cut you a break cause I’ve got tinted windows. From Newtown, work in Doylestown.

 

Best of luck to you on doing the window tint. I was trained by Llumar about 10 years ago. I have no problem forming vehicle tint, but I never really got into tinting vehicles since the newer ones are harder to put on due to the double seals and I didn't feel comfortable "hosing down" the inside of a customers vehicle in order to apply. So I've mainly stuck to commercial flat glass installs (which goes along with my sign and graphics company).

 

My tint on the driver & passenger side windows of the FRS are kinda beat up. Need to get them redone.

 

Hey guys. I think I lost wheel weight of rear wheel and getting bad vibrations. So I was gonna put spare on front and put front wheel on back to replace wheel in question. This way I'm not screwing up rear diff with two different size tires. Is my thinking correct? On front it shouldn't matter since it won't be in 4wd? I just don't know if it will screw with abs if car will think one wheel is going faster then other or it's not that much to abs to kick in? Spare is 265/75/16 I think and I have 285/70/17 as mains

 

Hey neighbor! Thanks man!

Hey TinyTech626, now that I jogged my memory I recall a Tacoma at that intersection. I’ve got dark tint too, no biggie I usually go that way to my kids school. Give me a honk next time.

Thanks Cazzwell, I’ve been handling film for almost 11 years. Sometimes I pull door panels lol. Makes it easier and faster for me. I use special towels and ropes for the water accumulation now.

What’s the name of your sign shop. Maybe I can give you a hand with installation contracts. Shoot me a PM if you’re interested, be nice to know some folks in the industry.

Let me know Homer, I’ll be getting my cutting machine and all my equipment set up at my new place soon. I can always knock it out for you.


Sorry I’ve been (and still moving) all weekend.

 

Can anyone recommend a shop to install a lift? I am in Chester County. I had a shop install a lift on my 4Runner, but I overpaid at the time.

 

Gear one performance did my friend's taco. Or mainline overland

 

Than

Thanks. I will look at both. I am pretty set on 5100s and AAL and don’t see that either stocks them.

 

That's what I got and MLO had to order them. Just make sure it's right 5100 part numbers course apparently there are two different 5100 part numbers. Both shops will have to order them anyway course I don't think it's popular product for them (mlo usually prefers old man emu suspension on their builds course they do more heavier builds for campers)

 

Great nail in brand new tire. Very small leak I guess it didn't make it all way through

 

It's a hard one to miss, there are a few other tacomas that run around that area who I don't believe are on the forum..

I may be in the same boat as Homer, let me know when you get your tint machine up and running.

 

Dat grill tho...

 

What's an amo cat?

 

It hauls amo, like a cat.

 

A gun toten female bad ass that drives a Tacoma.that doesn't take shit from anyone,and she might like to spell stuff backwards

 

Hello hissdrawl or depawsit