3rd Gen OEM tonneau cover leaking and loose needs adjustment.

My 3rd gen OEM tonneau cover seems to be looser then it used to be. You can lift the last fold/section up about 1"without unlocking it. Seems to be leaking more water then ever now. Is there any kind of adjustment that can make it seat tighter to the truck?

 

In for the response. Mine leaks pretty bad as well and has since I bought the truck with 6k on it. Pretty obnoxious lol

 

Push down on it until it clicks!

 

I figured that was a given...but this is after pushing it down until it clicks

 

Make sure the cleats are not interfering with the supports on the bottom of the tonneau, may have to move them an inch.

 

Also interested to see if there's some sort of adjustment for the tonneau cover. I can see mine bounce while driving at the tailgate. It's most certainly latched, but still loose. Debating pulling the side covers off to see if I can't move the metal studs lower to cause the latch to engage lower.

 

Subd

 

I had the Fit issue and took it to the Dealer and they adjusted it don't have a big Leaking problem water gets in but enough to matter