3rd Gen BHLM + Retrofit Projector

I mean, technically you could black out the highbeam bucket since you'll now have a bi-xenon. Just have to realize the bucket will basically be for looks now.

 

But muh lumens

 

I got a 5D 72,000 watt light bar from eBay if you wanna talk lumens.

 

Any experience with those diode dynamics?

 

I was just thinking about trying some spray tint. That way they would still be reflective. Quad high beams are awesome! Lol

 

I haven't tried them before, but they look legit. And they do have a good warranty. I figured I give it a shot.

 

FTFY

 

I’ve done a dozen or so. My only advice is to be prepared to hardware them to the original factory oem plug. The DD directions tell you to drill a hole in your lights and fische the wire through and seal it up. It’s much easier to just wire it to the plug for a good seal. Let me know if you want pictures. I’ve taken plenty.

 

I would love some pictures. Thank you!

 

I got the cougar motor LED bulbs from Amazon for my high beams. They're pretty bright.

 

I used high temp engine block paint
No need scuffing up the chrome
I noticed that when I was scuffed up the chrome if it wasn’t all exactly perfect you could see where it was sanded
I personally didn’t see a point in painting the cut offs
Before you put them in the oven be sure to remove all metal screws, plugs, wires and grommets
After I had done my lights I did a second set and (285 for about 15-20 min)noticed when leaving them in the oven longer I was able to get them apart pretty much the first try without having to put them back into reheat

 

Great, thanks for the advice! I appreciate it.

 

I sent you a Pm on Saturday. I'm sure you get quite a few but wondering if you still do BHLM?
Thank

 

Edit*:I'm a dumbass.

 

Thanks..
Edit: I know Meso doesn't, was hoping @motorsport36 did.

 

I actually do these all the time. Over 100 sets last year and still plan on doing a ton this year as well. You are correct though, I get a lot of requests. I will get to them tmrw.

 

Haha my bad. I missed the name on the quote. Thought he was asking about OP.

 

All good!

 

Correct. Just not enough hours in the day to juggle everything. But Jason knows what he's doing and is the go-to BHLM guy.

 

Can't get a better reference than that. Thanks