Rear lowering Kit for SR5 crew cab long bed

I would like to lower the rear as to level my truck. Can anyone recommend a kit or springs etc?

 

No such thing. Why would you want to decrease the capability of your truck? If anything buy a spacer for the front to bring it up to level it. That’s the normal route.

 

200# of sandbags would be a start. Adjust from there.

Actually, you'll like the ride quality too.

Keep in mind it's a delicate balance. Too much and the front starts to rise.

 

Level it from the front. 5100's on the first notch. Simple.

G.

 

I bet you could pull the overload spring from the bottom of the leaf pack and drop the rear some.

Pull another leaf if it isn't low enough.

*But as you pull leafs you'll lose hauling capacity.

And I think it'd look good lowered in the rear. If I didn't go off road as much as I do then I'd consider a good option to level out the truck.

 

Also welcome to TW

 

SOS Performance has a lowering kit. You may want to talk to them to see if a rear only drop is possible.

https://sosperformance.com/products/tr2037-2-front-35-rear-lowering-kit-fits-2016-tacoma

 

To be honest one of the only things about my new SR 2wd that I don't like is how they raised these things for 3rd gen.
If I wanted something higher I would have gotten the 4x4 model.

 

That looks like a spring under kit.

Which would be an easy 3.5" drop but I think the rake is only an inch or two.

Not much middle ground there.