What Have You Done To Your 3rd Gen Today?

I sent you a pm about the V2s

 

I think you sent this message to the wrong person

 

Oops, good call man. @killthehippies

 

Since I work at a custom fabrication company I decided to make these custom brackets for the morimoto hid elite kit. I laser cut these brackets from 1/8" aluminum so I didnt have to paint them. I wanted to see if this would be something other people would like as well. I will probably make a thread with these in them to gain interest if you guys are interested let me know and I will start making these for board members. I have custom made these to fit the morimoto kit but I can make these in blanks as well so that you can drill which ever holes you would like to in the them.

 

Installed MESO Customs V3 Ultimate Turn Signals. No more chrome!


Now headed to wash the truck while we still have warmish weather.

 

100% plug and play. Took me about 45 minutes to install because I had to take grill off. I’m only 5’-7” and have short arms so I was unable to reach with the grill on.

 

You’ll have to cut the threaded end of the Maxtrax pins to 11/16” to make it work. Other than that it all goes together easy.

Bed header rail
Pt278-35100-bh
Rail end cap
66134-04010
Mounting blocks
https://www.amazon.com/Maxtrax-Anchor-Tacoma-Tundra-Mounts/dp/B071YTQ43X
Maxtrax pins

$67 Maxtrax MKII Mounting Pin Set

https://www.amazon.com/Maxtrax-MKII...6570609&sr=1-1&keywords=maxtrax+mounting+pins

 

Thank you!

 

http://stores.ebay.com/tacomavinyldecals

 

Thats a great lookin truck

 

I’m in message sent!

 

Do you remember part # for those amber covers?

 

New lightbar!

 

Thank you!

@CaliRaisedLed - grill and light bar
@rrentrop - paint matched vinyl
@KTJO 4x4 - raptors
AVS - Bugflector 2

on to the next mod....

 

Where you at on the Gulf Coast? I live in Victoria!

 

Very nice looking truck Paul! I got some Raptor lights as well but haven't installed them yet

 

Got some more work accomplished with the custom stereo install.

Built the subwoofer rings for the two sub boxes. Built the middle amp rack and a front cover that sits flush with the amp so that all the wiring is concealed underneath. The front board comes off to gain access to the wiring when necessary. Considering doing a Toyota symbol cutout with orange LED accent lighting behind it with the top middle section above the amp.




Fiberglassed the front of the two sub boxes. Next will be a bondo layer on top of the fiberglass. Then smooth them out for a nice clean surface to paint.

 

I live in Houston. Got it from johnson gt on 45.

 

Peragon tonneau cover and raptor lights.

 

Bad abs wire?