Raleigh North Carolina and surrounding areas

I was going to try and find a place kind of centralized and if it happens once a month as a regular thing then it could be on their schedules.

 

So if you have a Scan Gauge X Gauge.....

https://www.scangauge.com/xgauge_co...ure-monitoring/toyota-tire-pressure-x-gauges/

I’ll program mine tomorrow see which sensor is dead.

 

Didn't know it could do that

I have the ultra gauge.. Kinda useless, or operator error

 

Still have these, make me an offer!!

 

NOPE, mine isn't current enough to be able to get those, may send it in at some point and have it updated. ( version 4.13, need 4.45 )

 

HELP !!!!!!!! Taking off front springs did pass side already having trouble with driver shock is moving nut is stuck

 

If you are replacing the shock just grab the shaft with a pair of vise grips, also sometimes there is a hex key in the top of the shaft or 2 flats cut that you can put a wrench on or vise grips.

 

I tried vice and no luck

 

Does the top of the strut shaft have any flats or a hex key? Also try heating the nut up with a map gas torch first sometimes you need to free up some loctite or nyloc nut or just plain rust then vise grip it and try again

 

IT has a slot for a 7mm but that’s long gong thanks to me vise lol

 

Try heating the nut pretty good then grabbing the shaft with your standard vice grips.

 

Sounds dirty.

 

It can be!

 

40k mile oil change and a foam cannon wash today. Hard to believe it was single digits last week and it's 66 today.

 

Thank you so much went and got some map gas and new vice finally came off thanks a bunch

 

No problem glad it worked out!

When I was a tech one of my mentors was a guy who spent most of his career in the North and his best advice was to not waste a ton of time with trying to loosen things gracefully and grab what he called the gas wrench a.k.a the oxy/acetylene torch. But for the homegamer map is hotter than propane so it does better.

 

Does anyone on here have experience getting windows tinted in the area? I'm new to the area and wanted to find somewhere that does a good job, because I don't want to get a bad tint job done.
Thanks

 

Dreamworks Motorsports in Roxboro does an awesome job. They may be far for you. That's who did mine. I am sure there are others in the area that may be closer.

 

First of welcome to TW! Second, can you define area so that the locals can point ya right

 

Shit. Good to know for me then