Heated Mirrors Kit - Interest / Update Thread (pic heavy)

I have the discontinued kit with the 15 minute timer built in. That probably changes option two a bit. I'll think about it and let you know. I wasn't thinking it would be that pricey, but thanks for getting back to me.

 

Order the new kit with what you want and simply pull the old switch and wiring. Once out, sell it here in the B/S/T section. It will sell, I know this because that is what I did and mine didn’t last three hours after I posted it.

 

Option 2 is still valid. Both the 5 and 15 minute options for left of steering have the timer built into the switch itself.

The cost is certainly not cheap. One area you could save a lot of money is on the switch itself. I use genuine Toyota parts with the kits, but if you are okay with aftermarket I think you can pick up a similar mirror adjust switch for only around $10 - $15 vs OEM around $75. The TDR relay is about $35 which would be needed on the second option. It starts adding up pretty quickly!

 

Just got some ProEFX mirrors thanks to the man @mach1man001. Now I need to wire some heat to those bad boys! PM sent.

 

Hello,

I live in Canada and would LOVE to have heated mirrors!!!

Would like to order;

Mirror adjust
15 minutes
Green
Canada

 

Please send me an PM with some more information including what mirrors you are interested in and your full address including the postal code so I can get you a quote for shipping. Thanks

 

So does this kit work with the 2010 - 2013 4runner mirror swap?

 

I know this post will quickly get buried, but...

Even on the nastiest days here in northwest Montana very near the Canadian border, I find no need for the 15 minute switch. 5 minutes is more than long enough on the worst days. This kit is awesome. I have the 15 minute switch and find myself manually shutting it off almost every time after 2-3 minutes. Sometimes I forget and realize my clear dry mirrors are being heated unnecessarily 10 minutes later.

 

This is actually timely insight. I’m close to the Canadian border as well and I’ve been debating between a 5 or 10 min switch. Thanks!

 

Oops sorry, I guess I didn't read the title to this thread correctly when I posted above. I thought this was a tow mirror specific thread

 

Up2NoGood can make you a harness so the 4Runner mirror swap and heated mirror mod are all plug and play. I bought one and it's my favorite mod to date.

 

That’s legit. If I didn’t need the towing mirrors I’d go with these. Love the puddle lights.

 

Sadly the switch is a little bit too tall.

 

I was wondering... how about relocating the VSD/Traction control switch to the center console using a Highlander switch to free up space for the OEM heated mirror switch. Could be an option for TRD O/R folks without blanks on the left side of the steering wheel. Would make sense to locate it right to the A-TRAC switch actuaally.

 

Or DAC. Also looks to be the center console type.

 

Or RSCA or inverter switch... looks like many options!

 

Replied to your email

It would require a custom harness to do 4Runner mirrors. I’ve done a few but they are a bit more work and materials to make it a click together integration.

lol yeah there are some possibilities, just replied to your pm.

 

Quick question for the heated mirror guru's out there. I see everyone appears to use 18 gauge wire for these but in combing through pick a part yards all the Camrey, RAV4 honda's and any thing else with a factory heated mirror appear to use a smaller 21 gauge set up. Any reason we can't a least use the smaller gauge to snake through the mirror as I also want to put the signal lights and maybe puddle lights in the mirrors.

 

I am finally making time to get this installed tomorrow once off duty. I am really looking forward to getting this done and knowing the likelihood of me finally getting this installed on my truck will pretty much guarantee that we will not suffer any more snow or ice on the cars in my area at least until next Oct/Nov. That being said, I am excited to finally put this excellent kit into action. Thanks again for the opportunity to purchase one for my Tacoma.

 

So the one thing I had forgotten about and didnt expect has got me stumped. I have completed the work on my drivers door mirror and it is done. I'm now to the point where I pulled the passenger door mirror from the truck and need to remove the mirror from the housing.

What I had forgotten, is that my truck was hit by a tree several months ago and damaged, including the original mirror getting broken off. I then took my truck to a family friend who owns his own body shop and had it the truck repaired including replacing the entire mirror. The problem is, that while the mirror looks completely stock, it evidently doesn't fit or mount the same way as the stock seems to, so I have no idea how to even remove the glass mirror part it to see if the new heated mirror might somehow fit because the two slots where I need to put the screwdriver in dont seem to exist.

Anyone have any ideas, suggestions or experience with this problem??

Second question:
While I'm trying to figure out how to deal with this passenger mirror that isn't certified toyota, I'm wondering at what stage can I leave this in? In other words, can I still complete the rest of the installation (outside of anything specifically related to the passenger mirror), and run it like normal for the next day or two till I get the mirror situation addressed, or will that possibly fry anything?

Andretti