What Have You Done To Your 2nd Gen Tacoma Today?

Wheelers ubolt flip kit and 1" spacers to finally get full travel in the rear. Shocks rode around too compressed when I had all my tools in the back.

 

That does stick out more than I need. Guess I'll stick with the regular bolt right now until I get skids.

 

Yeah, same for me. I figured I'd leave the hose attached, but shorten it so only about three or four inches stuck out. Just stuff it back up the hole when not being used. Then fish it out when it's time for the oil change.

 

Fumoto also makes the

$37 F103s LC-10 Lever Clip FS-Series Engine Oil Drain Valve, 1 Pack

F103s which has a shorter nipple, but that's probably only going to be 1/4 to 1/2" shorter.

 

How did you run the wiring for the roof light bar?

 

YOU SIR ARE A SLUT

 

I was thinking more like whore as I'm sure he makes money off it or gets favors in return. I have to hand it to him though he is apparently a happy whore/slut @boogie3478

 

You curb rub it and tuck it down the side of the windshield. Or you can go in the back window molding

 

so I have a small issue that has been driving me nuts for a year now, since the day I ditched my factory lights for aftermarkets it has been hell trying to get a good seal. I have siliconed the absolute crap out of these lights and the previous ones but it never fails they will fog up if there is a slight bit of moisture in the air. god forbid it rains lol. my question to all y'all is does anyone know a good deal on a set of Smoked TRD headlights for the earlier 2nd gens or preferably a stock BHLM with no chances of leak? hopefully y'all can help a guy out because he now has sunk more time effort and aggravation into headlights than I should have haha

 

Hmm that’s odd. I have afternarkets and they haven’t fogged up at all...just cheap ones from ebay

 

mine are a set of spyder projectors not the halos, but the single projector, looks like a retrofit

 

If they are these then I have the same ones on for 6 months now, no issues with just a seal of clear silicone when I first recieved them.

https://www.ebay.com/itm/For-2005-2...376245?hash=item1c91c031b5:g:IigAAOSwsBtaAqdT

 

Those are the ones, I have sealed them with plenty of silicone and still have moisture probs

 

Not sure what curb rub it means? Sounds sexual!

 

http://www.wesdonautomotive.com/jones-stainless-turbine-jt2525xl-exhaust-muffler-resonated/

These guys were quick and free shipping. Summit Racing has them too.

 

hopefully a front bumper?

 

Happy Sunday 2nd Gens today I adjusted my drums and greased my U joints. The U joints are probably the worst maintenance I've done. Two of the three are inaccessable. I ended up having to remove the zerks and use a needle adapter then replace the zerks. A royal pita.

 

interior LED upgrade

 

Where did you get the led bulbs from? And did they cause any issues. Lastly do they come in red?