What Have You Done To Your 2nd Gen Tacoma Today?

Oh geeze now you're really confusing me

 

In channel are the best way to go! I don’t like the way the out side the channel look!

 

I don’t give a fuck for the mother fucking win.

It’s simple addition!

 

Got my ST MAXX today

 

Cut my bedmat from my old GMC 1500 to fit my truck and secured it with the quick mod ( bolt in the drain hole) It's a little off but hey you can't beat free!

Question: anyone have issues with small leaks on the front right and left corners of a Leer shell where it doesn't fully seat with the bed? I can see small amount of light on both sides. Thinking of just sealing it with something.

 

I know I was playing along!

 

I did in my leer 100 and finally got around to sealing it with 3m caulk strips. No more leeks so far. I think it was the gap in the bed also in those corners not just the shell.
3M 08578 Black 1' Strip Calk

$32 3M Strip Calk, 08578, 1 ft Strips, Black, Soft Butyl Rubber, Permanent Elasticity, Joint Filling, Trunk Seams, 60 Pack

https://www.amazon.com/dp/B000PEZ1L4?ref=yo_pop_ma_swf

 

I will "one up that." I also get about 12-13 mpg. I also only have a 3.4 mile drive to work... and it doesn't help that my truck also looks like this.

(This is also the most recent pic, no winter shots)

 

Where did you get your factory keyless entry unit from??

 

Saturday I finally was able to add the Fabtech (I think) light bar I bought on these forums for a great price. Soon I will actually add the light!

 

Quick question for anybody who had factory tube steps and removed them.

Did yall plug the holes under the cab after taking the factory steps off?

Was under the truck yesterday and just saw all the holes and started wondering.

Thanks in advance ​

 

You can get rubber plugs for stuff like that. If PDR guys have to drill holes in cars to get their tools to the back of the panel they do it. I would plug them you are probably getting water and other debris splashed up in them.

 

Yup! I had installed the factory running boards and kept the caps which used to be in there. Later removed those and put in rock sliders so I put the caps in

 

Thanks yall!!! Any lead on where I could get plugs for the holes?

 

I have a bag of the OEM plugs to fill those holes!

 

When I pulled the steps I put the bolts back in

 

​

TAKE MY $$$$!

​

 

I feel like I should have done it this way. Sold all the hardware with the steps tho.