-12 offset

Does anyone have a rear picture of their truck that has -12 offset on the wheels? I’m planning on getting the TIS 535B And they have a -12 offset. I’m just trying to figure out whether I need to go with a different wheel if that Is going to stick the tires out too much. Would be great if people had pictures of their trucks with different offsets so I could see what I might be looking for.

 

Go to the scs sr8 thread the 16x8 are 4.00 backset, -12 offset lots of pics

 

What width? A wider wheel will stick out more than a narrower wheel with the same offset.

 

These are Fuel Kranks 17x9 -12 offset with 265/70/17

 

Well assuming u are getting the 17x9. That gives you a 4.5" of BS. If I remember correctly that's pretty much the same as running with an 1.25" wheel spacers on stock rims. So u can look for pictures of that as well. Should put the tires just barely passed the fender flares, I would say, maybe a 1/2" of poke if not pretty much flush

 

Thanks y’all. Finding some good pictures

 

4.5 backspace , -12 offset 285/70 17

 

wheels are 17x8

 

Check out CustomOffsets, they have a large repository of user-submitted pictures where you can specify things like offset.

 

That's technically a 0 offset a -12 would be 3.5 in backspace

 

Here is mine method standards they were a +25 offset but I have a 1.5" spacers thus making them essentially a -12 offset.

 

Just going by what scs has listed as the spec. for that wheel on their web site

 

Yeah I know wheel companies always do that but if you do the math conversion it doesn't add up. I have checked many wheel companies on this and they are either guessing on the backspace or the offset but truly using the other.

 

Definitely see where you are coming from I would think an 8" wheel with a 4" backset would be 0 offset,I just ordered these wheels will see when they get here.

 

Harder to measure offset though easy to measure backspace

 

-10 offset w/ 4.30 back space