What Have You Done To Your 2nd Gen Tacoma Today?

You bought there Toyota LEDs or the housing?

 

Any advice about the LED headlights?

 

There better than stock super crisp white light

 

I will be taking donations for retro fits in my paypal!

 

Installed 2/3 BAMF skids. That front IFS skid wasn't too challenging to install, being 80lbs. Next is the rear transfer case skid

 

I like the battery switch!

 

Cute shackle

 

New kicks for the lobster. Was a long process and months of looking around but the final product came out nice. Lots of trimming needed and still more to do. But damn these look bad ass!!!! Anyone interested in these just a heads up. You will need extended wheel studs. Toyota matrix studs are 1/2" longer than factory and worked perfectly. Oh... and did I mention trimming... Yeah lots of trimming these are a 285/70/17 on a 17x9.5 wheel. Truck is on a 2" leveling kit. Also little suggestion I used a ball joint press from oreillys to remove the stubborn wheel studs.

 

Completed a couple of small things over the last month or so:
- Installed LED interior lighting
- Added some bed rail mounts for an axe and shovel
- Ran the microphone for the aftermarket head unit up behind the A pillar

 

There only like $8 on eBay or Amazon.

 

So just to make sure my tire is too close to my UCA, right?



Besides a different size tire is the best option a small wheel spacer? Maybe 1/4"? Thank you for any help!

 

Uhh yeah too close

 

So would a set of 3/4" hub centric wheel spacers be the best solution?

 

Yes they would be, but you may have to trim the studs

 

Different wheels would be cleaner.

 

That wouldn't be a big deal.

I completely agree and plan on a set of SCS wheels, but it's not in the budget right now so spacers will have to do.

 

Are those Black Rhino Armory wheels? What's the backspace on them?

 

FTFY.

Yes.

 

What tire size is that? I'm assuming the stock 7.5" wide / 5.5" BS rims?