Tacoma Build Straight Out Of Jamaica

I've been in contact with FN to get price quote, originally needed 5 wheels and they only came in 4 on the web page. contacted them by email they said its no problem to get 5 ordered. I don't see why they wouldn't sell you just one if they can sell me 5. btw I went a different direction with my wheels but just a heads up I think FN is experiencing high orders with Christmas right around the corner so expect delays. Took about 3-4 days before I would get reply to my email.

 

I got a reply!!!!!!!!!!!! thank god lol

 

Im going to make the order for a replacement rim

 

@indetrucks

 

So now that everything is back on track and ive ordered all the parts and just here waiting...
took some pics from the rally on sunday

 

any one can help me out here..... my Centerline bearing aka carrier bearing is shot this is the 3rd time im changing it... is there an upgrade i can use vs the stock one??

 

https://www.summitracing.com/parts/...8W6Qc4KODLt24byXRtSOVs_UZFuylrxBoCMd0QAvD_BwE

Check your pinion angle. Usually it doesn't help to have one out of spec.

 

thanks alot... im gonna go that route and use some washers to drop it a bit

 

that bearing will fit my shaft with no issues right?

 

https://www.tacomaworld.com/threads/carrier-bearing…-alternatives-and-solutions.419706/



Just put a piece of flat stock on top of it since it's upside down from its usual orientation in a Ranger.

 

thanks man

 

new brake set up

 

i went and got the carrier bearing that was recommended it definitely wasn't a direct bolt up... i had the machine my drive shaft to fit it and modify the bearing bolt up a bit.... however i have a very harsh vibration at around 40-50mph i take it i need to drop it some more with spacers?

 

end result

 

Could be the angle, and need more washers, could be the drive shaft needs to be balanced, or could be both.

Those brakes look fantastic.

 

thanks man gonna try more spacers and see

 

Tremec has a phone app, to to help you make sure your drive shaft angles are all good. I believe it also works for two piece drive shafts.

 

@Cr250jumper did you have to machine your ds when you installed your carrier bearing?

 

Did you do something like this?

https://www.tacomaworld.com/threads/drive-shaft-vibrations-solved-step-by-step.244535/

 

No mine fit, that carrier bearing looks a little different than the one I used