What have you done to your Tacoma today? 1st Gen Edition

Got my drive line today from the shop new, u-joint, new carrier and balanced

 

did a thing this weekend









It actually pumps out a lot more bass than expected... worth it in my opinion:

$270 Kicker Hideaway Powered Enclosure HS8 - Used Acceptable

https://www.amazon.com/Hideaway-Powered-Subwoofer-Enclosure-HS8/dp/B007LQWSYC

 

How’s much did they charge for the center bearing? If they charged them out seperately.

 

The parts were charged together

 

Oh. I’m about to roll my truck into a lake because of that (not really but it sounds good sometimes)

 

Just buy a new CB. Unless you are a mechanic, throwing parts at it is your best bet

 

I did this morning, so far so goodish, besides the warmth that shows up right by the bearing. Its a constant heat, it doesn't get hotter and hotter the farther its driven, just stays warm.

 

I'll check again for you and see if maybe I missed it i only drove for 8 miles ill let you know asap. Anything else you can tell us about your CB or drive shaft

 

Not really, I actually used a torque wrench today. Maybe there's nothing actually wrong and I'm just paranoid.

I have to drive 150ish miles later today so I guess Ill know for sure.

 

I had the same problem with hawk pads from the start, I tried removing the glaze and re doing the bedding procedure, nothing worked. Swapped to ebc and have been extremely happy.

 

The bass knobs are a life changer imo. My brother went without one for a while and had to go through a bunch of settings on his radio to adjust it.

 

If anyone has any leads on 1st gen driver side fender, flare, hood, and grille let me know before I start buying shit. Thanks. Closer to Texas the better.
Some extra pics

 

Post up on Facebook if you have it. I’m sure someone will know someone who has a cousin that has some parts.

Bigger audience.

My cheap eBay fendors fit pretty good, but you’ll have to paint it.

 

Looking for oem. Thanks.

 

Here is my very first post on TW. I have been a fan of TW for a while so I finally made an account.

Saturday I received my 33x10.50r15's in the mail. I got them mounted and balanced Saturday. Today I wired and installed 2 flush mount LED pods on the back of my tool box. I still need to do a little trimming on the lower valence of my bumper but I still drive it.

 

Welcome to the party pal!

 

Agreed!

Speaking of which. I initially didn't have time to install my bass controller (at least not where I wanted it to be), so I left it off. It's now on my to-do list for this weekend.

 

I think I might have 01-04 corner lights (clear) if you need them. If you do, I'll just send them to you.

Just need to check the parts heap.

 

Thanks man! Yeah it'd be just the driver side corner.

 

Woo red single cab! Love mine. Yours an SX?