What Have You Done To Your 3rd Gen Today?

Yes. Thanks.

 

I have the GTR3s in the lows and highs, and OPT7's in the fogs. Very happy with them. I drive in the dark, back roads, every morning. BTW, I didn't have to remove the headlights to install the lows, and installed the fogs through the wheel wells and scraped my hands and forearms. Next time for the fogs I'll take off the grill if I need to and go from the front.

 

Stock height?

 

I don’t know why the owners manual says to go through the wheel well. You can reach them from the top pretty easy.

 

2 1/2-3” OME medium lift.

 

Couldn't you go bigger tires

 

After years of procrastinating finally took the plunge and bought an 18 Tacoma Cement...Told my friends and family I would not do any mods, since I have invested so much in my GSF. I couldn't help myself already made several orders. Thanks to you guys for all your inspiration!

Picked up a

 

Brake Caliper Paint Kit - High Heat 980-Degree F, Two-Part Gloss Paint with Cleaning Spray and Brush, Blue Finish https://www.amazon.com/dp/B0753XMT83/ref=cm_sw_r_cp_apip_dsQTFLSyTGEzZ
They make it in red also.
Small wire brush, blue painters tape, can of compressed air.

First time I have done this, pretty easy, held a good bright light in one hand to see good and painted with the other hand.

 

I don’t think so with out a CMC. My lift expert said 285s would rub. I use to have 275/70/17 KO2S with that lift, it was fine on the pavement and gravel roads, but on moderate trails the KO2S would rub especially when turning. So I went down to 265/70/17s grapplers. Much better on the trails, but makes the wheel well look cavernous.

275s

265s

 

I’m not sure what the law would be our how it came into effect, I just saw it on the item description for the one I looked at on Amazon, it had a list of states where they were illegal. I’m not sure if they would ship one too me or not. I may try it before all is said and done, or I’ll have it shipped to my family in when I go out there next. I can’t imagine getting pulled over or fined for having it on.

 

I installed an Electop dual USB plug in place of the cigarette lighter since I have no use for it.
I hate those cheap plug in adapters since they never last long. I’ve gone through at least 15+ already. I am hoping that this will last a lot longer. Both USB plugs are 2.1amp. There are faster chargers running 2.4 amps.
The nice thing about this adapter is that it looks like factory in that it is near flush. Just need to enlarge the hole a tad.

 

Custom top bolt brackets for your King rears? They do not look like the typical stud design you see on everybody else’s.

 

Congrats on your new money pit, I mean truck.

 

Ok dumb question, when using wheel spacers, i assume you use them on all four? I'm seeing posting of only using on the front two wheels.

 

Sure, you could only put them on the front two if you want that Baja style look.

I have them on all four and I think it looks amazing.

 

That is one nice looking truck.

 

Congrats. Pics of GSF? I'm guessing it's modded too...

 

Got rid of some wood in the back of the truck and rearranged everything while the gf read a book and stayed warm.

 

You can’t just post that and not give people a hot link! LOL

https://www.amazon.com/dp/B01M0GR0FQ/_encoding=UTF8?coliid=I2MGLF85UEU742&colid=32T9XQ34OSWRU&psc=1

 

Now THAT’S out there!