What Have You Done To Your 3rd Gen Today?

Not what I did but I need to find a thread made that I can't find anymore. Sorry for posting here but would rather not start a thread for asking a question.
I'm looking for additional parts like extrusions and bolts, etc. for Prinsu rack

Thanks!

 

GET A PRO COMP AAL/ OVERLOAD SPRING!!! you will be way happier trust me!

 

Looks like a black door skin. I see a door handle in the lower left hand corner. Would be the driver side door of the other vehicle if that's the case.

 

I see you have the same setup on the front. Got a pic? And I'm assuming you have the overload spring you mention as well. How much rear lift did that add?? Thanks for the advice, btw...

 

If you put a 1.5” the rear will be higher for sure. With 1” the rear is prob gonna be about 1/4” higher depending on your truck, but should be close enough if you wanna keep the front and back pretty close from level

 

I actually don't mind the rear being a little higher. I haul heavy music equipment a couple times a month and tow with it, as well. Plus I'm gonna install a cab-height fiberglass topper in the near future. I can't stand that nose-high look. With the 2" in the front and 1.5" in the rear I will be a 1/2" less rake than before I started so hopefully it looks OK. I will have the block installed this afternoon and post a pic. I appreciate the positive feedback ya get here though...

 

They have their own forum under vendors. Everything you need should be found in a thread over there:

https://www.tacomaworld.com/forums/prinsu-design-studio.209/

 

Finally received the garnish so I installed my grill this morning. Tint done on Wednesday, tonneau cover last week. Hoping to get suspension on next week.

 

heres before and after rear Procomp AAL/ overload spring (it raised the bed 1.50". so 2"front 1.5" rear... (first 2 are before 2nd 2 are after)

 

Man, I've been here long enough I should know better.
THIS is the actual thread i was looking for conveniently placed in the Prinsu forum. https://www.tacomaworld.com/threads/alternate-hw-extras-etc-for-prinsu.498163/
THANKS!!

 

Newbie here. Recently purchased a used 2016 Taco. Been very happy so far. What I have done in the last month:

• Weathertech mats
• Predator side tubes
• OEM bed mat
• Extang solid fold 2.0 bed cover
• Removed the stickers on rear quarter panel and the V6 badge from the tailgate. So much cleaner now.
• Voodoo auto start

Currently looking to replace the chrome grille (a lot of threads to read through).
Will be adding a garage door opener push button mod, likely to the empty panel to the left of the steering wheel.
Tires will get upgraded sometime this year probably.
Been lurking on this forum ever since the purchase, great place. Thanks to those that share their experiences.

 

I have been looking at getting a rear bumper set up like this, I love the utility for when youre camping and overlanding but would hate to have the gas cans and tire swingarm on full time. Do you know if those can be taken off so in between trips (just running around town or whatnot)?

 

Did you notice any difference regarding the tss with the new grill?

 

Not yet. Only drove around the block after install. Don't really expect any issues.

 

I just read somewhere that you need to get the tss calibrated after a new grill or windshield. Hope not as i have a new grill on the way and need a new windshield!

 

Welcome to the club! Check my build if you want cheap ideas. We're all here for the people! Definitely keep us updated on the garage door mod. I'm interested.

 

I've read different stories too. If needed, I'll have done at the first service.

 

HOLY CRAP!!!!! I hope your ok!! Sorry to see this!

 

Hopefully only "mostly dead" and there's hope. Otherwise...sorry bud.

 

Got tired of the Velcro holding my cb radio to the side of of my center console. so I bought this:

$43 RAM Mounts RAM-B-316-1U Pod I Vehicle Mount with 18" Rod and Socket Arm Compatible with RAM B Size 1" Ball Components

https://www.amazon.com/gp/aw/d/B006ZOW1U2/ref=yo_ii_img?ie=UTF8&psc=1
and used an extra ram ball to mount it closer and more accessible to me. It's a little wobbly, but it's clean(ish) and looks a lot better
(wire clean-up is next)