What Have You Done To Your 3rd Gen Today?

That's called riding not driving.

 

Installed a dual air temp gauge setup. Actually took a while to find parts and build the wiring harness, but I got it done! There are more pics at the end of page 3 on my build thread!

 

Yup. Makes so people can text and drive and be slightly less of an asshole

 

yes sir

 

Oh no, they are still as much an asshole as they've always been. I'm just hoping this doesn't make more folks convert to deeper assholism.
Yes I just made that word up. You read it here first. I'm copyrighting that shit!

 

Naw just checked and my highs weren't on in that photo.

My fogs turn off too.

 

OK, last night I installed the Rough Country 2" lift to the front. Tonight I just finished up installing a 1.5" block to the rear. The end look is exactly what I wanted to achieve as far as the height goes. I know MOST on here seem to go with the 5100s all around with OME springs on the front and an AAL or a new leaf pack on the rear. This whole setup cost me $110 so I'm gonna drive it a couple hundred miles and see how it feels. I don't really seek out to off road it so we shall see. It did really give it a nice stance. Tires and wheel spacers are next. I happen to like the factory O/R wheels so they're staying. Probably going with Falken AT3Ws in size 265/75/16. They're about 1.2" taller than the stock Kevlar Goodyears, and a lot more aggressive looking. Anyway, feel free to weigh in and tell me what ya think...
(First pic is stock, 2nd is with the lift installed.)

 

Is the ARB wired or just there for storage?

 

Welp! That feeling when you realize that there are nearly 100 pages of TW to catchup when you had a really busy week at work to log in .
I received some @mesojdm loving today in the mail .
Drop in custom tail light boards.
So I quickly added some fine wire as jumpers by surface mounts, used my magnifying lens to help me see. I still need to put a thin layer of clear acrylic glue over the thin exposed wires to insulate the threads as I don't have any safe way of applying the dielectric material to use as composite coating (that thing is a bit toxic).
Next up. Use my dremel tool to hack my tail lamps apart .
These things wicked bright

 

Best price I could Find was from
Toyotaonlineparts.

https://toyotaparts.mcgeorgetoyota.com/?p=catalog&mode=search&search_in=all&search_str=Ptr61-35170

 

Plenty of people here in northern VA doing that and most of them aren't even in Toyota's...

 

Is this thread invisible to anyone else when looking for it under the 3rd gen stickies section? The only way it shows up for me is doing a search for my last post here. Weird.

 

Shows up for me in the stickie section. At least earlier this morning it did.

 

Just ordered mine. Thanks for the link.

 

That Wilco Hitchgate Solo life!

 

Interested in what the headlights look like installed.

 

How hard is it to switch them out? Do they just pull off and then snap back on?

 

These really turned out very nice. So glad I got a chance to see them go from your vision to them being mounted on your truck. Great job man!

 

No.

 

Those look like they'll be a royal PITA to clean
Different strokes for different folks.