What Have You Done To Your 2nd Gen Tacoma Today?

How long have you been running T6?

 

One day....been running the t5 15w40 for 5k though

 

Why so thick?

 

I have almost 200k and was getting a slight knock because the Mobil 1 is so thin. Went to 15w40 to test it out and my truck has never ran better

Switched to t6 5w-40 and the truck is running perfect. I probably won’t ever run another oil other than t6

 

Congrats on the mile stone. I know these engines have a famous taco tick.

 

I got some generic u shaped pod brackets and some hardware from home depot. Mounted right up to the center hole inside the fog light hole.

 

Well anybody can buy tools now to remove any locking wheel nut, I got gorilla locking nuts so at least they would have to spend more time removing them but one locking nut like yours, agreed there are a lot of thieves out there. I've got some spare gorilla nuts if your interested

 

Guess I'll have to do the same. Thanks! Sucks that they recommend and sell Baja but it isn't a form fit function install.

 

Only way to get trash barrels to the curb is between the truck & property wall. This close to the house gives me a few inches to spare so the barrels dont pinstripe the truck.

 

Planning on cleaning the throttle body and MAF this weekend, should I go ahead and do the spark plugs as well? because its not like I have a life or anything other than TW and my truck LOL

 

Turn down and hangers welded on.

 

Oil/filter change. Rear diff fluid change. Transmission fluid change. Tire rotation.

 

Installed my skid and hd tow hook from BPF (@Matt123).

 

Where's he top of tour truck?!

 

Plasti dipped my ATO brackets and got a lock.

 

What's the difference between the two?

 

The gorilla lugs have a grooved surface that runs the length of the lug and you take the on and off with a lug key they give you. Pretty good system for not a lot of cash here's a link. https://www.summitracing.com/parts/gor-26145ht/overview/ just an example you can look up easy for your truck

 

Installed the T-rex eyelids and attached a Hot Wheels grill badge I bodgered together from the '13 Camaro HW Edition trunk badge.

 

Finished my raptor lights and led install. Previously had a 10in Rigid Radiance (now FS) behind the grille.

 

Installed a 3 inch ome lift with add-a-leafs. Bigger tires are next. Thanks to Dnpbakon for helping install..