Custom Switch Panels

Up for grabs are some custom lower and side panels I made. This is great solution for people that have the original lower 3 hole panel and want more switches. The Toyota version is $150+ and you have to purchase the entire piece. This is a nice OEM looking alternative. THIS REQUIRES FABRICATION of your original panel! Sold as a DIY part. The switch holes will accept any OEM or aftermarket(Ch4x4) switches.
Many different configurations to fit your build needs. I will also be taking special requests soon.

100% Designed and made in the USA!





CUSTOM MADE SWITCH PANELS
$130 + S&H
https://mesocustoms.com/products/3rd-gen-tacoma-custom-made-switch-panel?_pos=9&_sid=e477eb340&_ss=r

LOWER SWITCH PANELS:

LSP7W - 6 Switch hole + Rear window(window button is in the center now)

$60+ S&H










LSP7- 7 Switch Hole







LSP5.1 - 5 Switch hole + Cab light







CUBBY PANELS:

CP8 - 8 Switch Hole







CP4P- 4 Switch hole + OEM Pocket

(pocket not included)





CP6.1 - 6 Switch Hole + Cab Light

CP6.1W - 6 Switch Hole + Cab Light(with rear window switch)










CPSP- Flush mounts a SwitchPro 9100




CPSPW- Flush mounts a SwitchPro 9100- with rear window switch

OOS









**NEW**
SWITCH BLANKS
These will snap into an existing hole to provide a clean filler for future switches or custom projects. RAW printed finish

$3.99/EA + FREE SHIPPING

SMALL- (MOST COMMON SIZE FOR ALL OF MY PANELS!)
SBS-


LARGE-
SBL


(Large on Left, Small on right)





SBS - (SMALL)- Fits smaller rectangle holes (OEM and MESO panels)


SBL - (LARGE)-Fits Larger rectangle holes (OEM and MESO panels)



INSTALLED PICS:








Switch example



This is how mine is setup


Where you need to trim the OEM panel(doesn't have to be perfect, the bezel covers the hole


The back has posts you can epoxy/plastic weld/etc to hold it in



OPTION 2: 7 SWITCH + CIG LIGHTER

 

I’ll take it!

 

That was quick. SOLD

 

If sale falls through, I’ll take it

 

The people demand more!!

 

This looks sweet and really organized, would be amazing to have all switches in one spot instead of mixed in two locations

 

Damn you!!!! lol

This guy is right!

 

The whole reason I made this. Having the bed power outlet and cargo light switch out in the middle of nowhere bugged me. Now I have all my OEM switches in a line at the same location.

Sold. Sorry amigo.

I just threw an extra in the printer, but if you guys are serious I can make more.
I can also customize the switch layout/number/etc etc. or even a flat blank panel for you SR guys

 

I’m in for one, well I’ll buy it now and install it in 9 months but I’ll have it waiting for me.

 

Rule #1: buy MESO stuff when in stock,
Worry about details later

 

WOW THAT WAS FAST!!!! <20 min HAHAHAHA

 

Well of course, they're only available for like 3 minutes at a time lol

 

Dibs.

 

Hmm

 

interested if there’s more.. what’s the price?

 

Ok @mesojdm I have been thinking about this as well on the relocation of the switches, I will admit it was inspired by you making panels and what not. Now the only thing I have not looked into the the actual rerouting of the wires, did you just end of cutting the ends off and extend them or did you by the male/female portion of the connection the switch make your wires and then relocate? I like the one you made for the roof portion as I was thinking that the parking assist and BSM could move to the roof as it would match the rest of what is really up there, to me, but I have sunroof so I would only have spots for two more, but would need a panel made...

 

More practical Meso products that everyone wants and needs. @mesojdm , I am sure you would sell alot of these if you made them available! I would buy one if i didn’t already have a 5 hole for the BSM. Just saying for everyone without the P & T package.

 

No such thing, first come first serve hahaha

 

Dead serious.