locker wiring help...

I got this TRD rear axle with locker and swapped it into my non trd prerunner everything fine so far, but I don't have all the connectors and wiring set up yet.
I have the OEM swith from inside and the plug that goes to the axle, no wires going to the rear axle yet. Anyone know how to just wire it up to work(meaning put power to it to engage the locker) no running thru the ECU or anything yet.
just hoping to get it working for this weekend.
any help would be appreciated.

 

2 months later, I finally made a harness for the locker.
The wires are pretty much color coded, I drew a line on the last foot of the ones that needed lines
$25 in wire and the spiffy blue loom

 

any links or specific diagrams you followed? i need to make one of these as well and dont want to use the ECU/OEM wiring so i have full control...

 

I know this is an old thread but how did this hold up? im about to do this.