(SOLD OUT) Discounted Price on TRD Pro Suspension Kit

How much lift will these give over stock height?

 

Or maybe Toyota realized their $1600+ asking price was a complete ripoff compared to other shock options...

 

Ordered mine from oempartworld, $601 delivered.

 

1.75" give or take, no lift on rear. This is the TRD Pro Suspension that comes on the older pros. The new pros use Fox. These are just non adjustable bilstein 6112 designed for Toyota specs on the pro trucks.

 

Got the parts last week.

 

That's a killer deal on a great setup. Bigger & better shocks than stock, and they're tuned by Toyota for our 2nd gen Tacomas.

 

Not installed yet. They're sitting in the garage next to my new FJ trail team wheels I also bought. Just waiting to buy new tires, will install it all at the same time. Stepping down to 265/75r16 from 285/70r17. (between shedding ~10lbs/wheel and ~15lbs/tire, plus new suspension, I imagine it's going to ride a hell of a lot better than it does currently)

I can't wait to throw the RevTek spacer lift and 180k mile-old stock Bilsteins in the trash.

 

Not needed. The driver side shock is set on a slightly higher clip on the shock body to counteract the lean.

 

Yup!

 

The fronts come assembled with the lean adjusted for, the drivers side is up one notch compared to the passengers side.
I'm in the Great White North and couldn't pass on this deal, I picked it up for $560 plus shipping to the border (Sumas).

 

Am i safe in assuming that this will fit a 3rd gen TRD OR?

 

Yes

Yes

 

Yup

https://www.oempartworld.com/oem-pa...n-shocks-w-trd-tuned-front-springs-ptr1335150

 

@scottalot I see you trying to deny it but you need this setup bro

 

There's a 50+ page thread on this for 3rd gens.

 

Doo eet! This price is cheaper than buying just the 6112 fronts...and Toyota is clearing stock. In the 3rd gen thread the stock level has been going down, down, down nationwide. I think ~100 kits left?

I doubt Toyota will buy anymore of these kits from Bilstien, since the 2G Taco has been done for 3 years now, and the 3G Pro uses Fox.

 

~1.75" up front.

I have a Wheeler's 1.5" AAL, if nothing more to help offset the Leer, hi-lift and max-axe I always keep in the bed. 4-leaf recall spings were freshly installed when I bought the truck. US-OR winch mount with Smitty XRC up front. Hoping for a factory stance when done...

 

I mean with all you're saving on the kit you're basically losing money if you don't buy it

 

Jared8907 WHATS YOUR POINT?

 

Anyone in South Florida wanna help me install these? I will provide all the beer