What Have You Done To Your 2nd Gen Tacoma Today?

This is my second go around with the plugs. First time I didn't notice much of a difference. This time was really smooth. Interesting because I was 6,000 miles late on the first one and this time I did it 1500 miles early.

 

The truck gets great gas mileage about 21 mpg. Stock suspension 265/70R16 tires.

 

Installed '12 lower console. Functional aux port to the Pioneer headunit. The usb is for charging. Installed two 12v ports, one lighted, the other dual usb chargers with a volt meter read. And most importantly, 3 more blank spots for future switches.


Lower panel part no: 55407-04050-B0 (gray)
Factory aux/usb port part no: 861900C020861900C020
Left 12v:

YONHAN 2 Pack Cigarette Lighter Socket, Waterproof Marine Grade Cigarette Lighter Plug Socket with Fuse & Wire, Power Supply Socket Outlet Adapter Plug for 12V/24V DC Car Boat Motorcycle

https://www.amazon.com/gp/product/B0772D9915/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Right 12v:

LiDiVi 2 USB Charger Socket Power Outlet 2.1A & 2.1A with Red Voltmeter LED Digital Display for Car Boat Marine Mobile

https://www.amazon.com/gp/product/B073NCMTQL/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

 

Went through the car wash and wiped everything down. Even got most of the Dog hair out

 

Nice day....kinda bored. So I dropped my hitch...which was developing some rusty areas.

Sanded the crusty spots. Cleaned it up. Hit it with a couple of coats of Rust Reformer followed by a couple of coats of gloss.

 

great job!

 

Thank you

 

Finished my sleeping platform.

 

Painted the door frames black like the 3gen

 

did the black headlight Mod on one side. will do the other side this week before and after pix also wraped side window panel in carbon fiber

 

Thats what About 800lbs of posts looks like. My truck has the 4 leaf pack. It sagged 4" when measured at the open tailgate. So slightly less at the wheel arch.

 

Added 30" led light bar stealth mount to the wife's taco

 

Hit a milestone, also fixed a broken wheel stud and cleaned up and serviced the rear breaks. Had a broken spring so I replaced that as well, looked like the salt from the roads ate it up.

 

Went down to the local state park today for some R&R and photography. Of course I had to snag a couple of the truck.

Bumper should be back to color matched sometime in the next couple weeks; Can’t stand that chrome

But, dat assss

 

Swapped out my left front wheel bearing that was humming pretty loudly.

 

... ... ....

 

What ya building?

 

Yes i know they have one jyst always had a greasable one

 

This is what we are aiming for.