2nd and 3rd Gen TRD Embossed Skid Plate

Not sure, I know it’s a bit wider than the factory one. It does make it more of a pain to install though. Lining up front bolts if doing yourself.

 

Anyone have the instructions? It only loads the first part on the website. Or a youtube link would be even better.

 

Boom!install complete. Anyone else have an uneven gap between plate and bumper?

 

Nice paint job! What/how did you paint it with?

 

Paint pen! Chevy poppy red. 3 coats, 4 of clear coat.

 

Yup, driver side sticks out a little further on mine

 

I had to adjust the bolts to make it a little evener.

 

Mine as well.

 

You don't need to have your tin OEM skid plate.

The spacers are directional so make sure you have the P on the passenger side and D on the driver side. You can also correct this by removing one of the washers or by pushing or pulling one side of the skid plate.

 

My driver side had a bit more gap at first but I loosened all 4 bolts, pushed in on driver side while tightening and tightened the passenger side as it was and it lines up perfectly. The Warn shackle looks great on there too.

Only thing I will change is getting some black Allen bolts for the front two.

 

Those warn shackles are awesome. I looked at buying 2 for my recovery bar but then I saw the price lol

I'm thinking I'll just spray some plastic dip on those bolts and call it a day. I have a can laying around already anyways.

 

Man, I could not get it the driver side bolt to thread in. Gave up, will have to give it another go later. Anyone else struggle with it?

 

why cant we use on both sides??? and have 2?

 

details on those double tow hooks plz...

 

I've attempted to install mine twice already. Couldn't get the bolts to line up through the two spacers (included & factory) and all associated plates/washers. Will attempt a third time, and was told to loosen the rear bolts as much as possible.

 

In the same boat as you brother, hopefully 3rd time's the try. The last attempt the wife got under the truck and was trying to help me out as she saw I was frustrated. I'm already dreading my next oil change...think the dealer will take it on and off no questions asked?

 

I have a 2nd gen, so this wont need to come off for oil changes. Plus, I have the Fumoto, and do them myself.
I'm not sure when I'll get around to my third attempt, as it's unusually cold where I am, and I might get snow soon.
If you manage to get it on before I do, be sure to post up tips here (I will do the same).

 

Those having issues with the driver side bolt threading. The factory plate is misaligned with the threaded nut above it. Just wiggle the factory plate around while threading the bolt by hand until it catches. Easy peasy

 

Got my shipping notification! Estimated delivery is next Wednesday. #4570

 

Any 3rd gens driving around without the factory skid under there? Anyone want to take one for the team and try it out? Matt, any advice for 3rd gens and taking off the factory skid?