What Have You Done To Your 3rd Gen Today?

Bridge4 · Feb 21, 2018

ToyoDrew said: ↑

Nice! I think this is the first Revolver X4 that has been posted here...it's the first one I've seen anyways!

1. For the weatherstripping that goes toward the front (just behind the cab), I used the thinner/wider strip that the instructions said to use (since we have caps on the bedrails). It worked great for me and it looks just as @RobP62 pictured.

2. Initially, I was worried about the weight limit not being anywhere close to the claimed amount (because of the flex it exhibits if you put something in the middle on the very back when the tailgate is down), but thanks to my [insert explative] kids, I now have a lot more faith that it can hold a couple of adults laying top of it. It does flex, but that's just becaus there are so many joints vs the 2 or 3 joints a trifold/quadfold cover has.

3. I did put some silicone at the corners during my install to prevent any possible leaking up between the bedrail caps, so no need for drain tubes and any drilling of holes. No leaks for me (up front). During heavy downpours, I do get a few small trickles down the sides of my bed bed (in the rear 1/3rd), but since I have a bed mat, the small amount of water just runs under it and then out the tailgate without getting anything wet. No need for me to seal it completely (not worth uninstalling the cover just to seal the small trickles).
Click to expand...

I ordered it from real truck a few weeks ago, they weren't in production yet so I had to wait, it shipped on valentines day. I probably have one of the first in the country, besides maybe some demo ones that might have been out for a bit. Good to hear that the weight really can hold! I think all the flex threw me off, but I will slowly start testing it. Also good to know that the silicone should fix any issues!

Koitz · Feb 21, 2018

spiros1 said: ↑

really like it, may i have the link and the way you install it? mine scraped cause i dont know how to put it on the hood, thank
Click to expand...

spiros1 said: ↑

really like it, may i have the link and the way you install it? mine scraped cause i dont know how to put it on the hood, thank
Click to expand...

IMPORTequipment.com

A profesional shop installed them

Connaghan · Feb 21, 2018

mrproduxn said: ↑

me-so me-so me-so. You gotta join the me-so led party. It's where all the cool people hang out

Click to expand...

Can I get a link for those lights please?

8102 · Feb 21, 2018

THATCH11B said: ↑

Switched out all my exterior lights (except headlights) to VLED LED’s. Looks great and no resistors! Shout out to @Sedyn for his assistance. Interior is done already with @mesojdm ‘s awesome products. Now to figure out the headlights.
Click to expand...

I went with VLED Micros for the Fogs and Low Beams, very happy with them.

scottsglock29 · Feb 21, 2018

Installed @mesojdm ultimate map and dome. They are awesome.

Sr_Suerte · Feb 21, 2018

Finally took the air dam off today...now I need to look into skid plate options

Now I wait for my 6112/5160 set up to come in so I can have that put on with BFG’S and pro comp alloy wheels

Jonesy78672 · Feb 21, 2018

scottsglock29 said: ↑

Installed @mesojdm ultimate map and dome. They are awesome.

Click to expand...

Does he still have any for sale

mrproduxn · Feb 21, 2018

Jonesy78672 said: ↑

Does he still have any for sale
Click to expand...

Check page 1
https://www.tacomaworld.com/threads/custom-led-map-and-dome-lights.521923/

mrproduxn · Feb 21, 2018

Connaghan said: ↑

Can I get a link for those lights please?
Click to expand...

check page 1
https://www.tacomaworld.com/threads/custom-led-map-and-dome-lights.521923/

TACOsoup · Feb 21, 2018

mesojdm said: ↑

Need some maps to match. Those look like they are fading to their death.
Click to expand...

Lol Check the light thread. I did order some but the package is delayed in Pittsburgh. I ordered them at the same time as the dome. Why did you send them in different packages?Are you making me wait longer on purpose?

scottsglock29 · Feb 21, 2018

Jonesy78672 said: ↑

Does he still have any for sale
Click to expand...

I am not sure. Here is the thread. Post # 1

https://www.tacomaworld.com/threads/custom-led-map-and-dome-lights.521923/

MowHawk · Feb 21, 2018

Tocamo said: ↑

They look fantastic derped black! Chucked the V6 emblem....
Click to expand...

Ya I've plasti dipped b4, might try it

MowHawk · Feb 21, 2018

TACOsoup said: ↑

Got a china bro grill, debadged and some @mesojdm lights

Click to expand...

Good looking truck, what lift u running

TACOsoup · Feb 21, 2018

MowHawk said: ↑

Good looking truck, what lift u running
Click to expand...

Thanks! OME all the way around.

DesertTRD · Feb 21, 2018

Took her out on the lake.

Papadave418 · Feb 21, 2018

Got my Ray 10’s yesterday and new tires on today

RobP62 · Feb 21, 2018

SurfratTX said: ↑

Every time I see those wheels I start itching to buy!
Those are Brass or Gold?
I think you actually told me before....short term memory.
Great looking, truck too!
Click to expand...

Thanks Lee, Brushed Copper Bro! They'd look real nice on you're new ride too.

RobP62 · Feb 21, 2018

DesertTRD said: ↑

Took her out on the lake.
Click to expand...

Insanity at it's finest! What big balls you have!

RobP62 · Feb 21, 2018

New Version 2 Ultimate LED Map light to match the Ultimate LED Dome light.

Really brings out the true Demon in me.

Thanks @mesojdm !

RobP62 · Feb 21, 2018

ToyoDrew said: ↑

Nice! I think this is the first Revolver X4 that has been posted here...it's the first one I've seen anyways!

1. For the weatherstripping that goes toward the front (just behind the cab), I used the thinner/wider strip that the instructions said to use (since we have caps on the bedrails). It worked great for me and it looks just as @RobP62 pictured.

2. Initially, I was worried about the weight limit not being anywhere close to the claimed amount (because of the flex it exhibits if you put something in the middle on the very back when the tailgate is down), but thanks to my [insert explative] kids, I now have a lot more faith that it can hold a couple of adults laying top of it. It does flex, but that's just becaus there are so many joints vs the 2 or 3 joints a trifold/quadfold cover has.

3. I did put some silicone at the corners during my install to prevent any possible leaking up between the bedrail caps, so no need for drain tubes and any drilling of holes. No leaks for me (up front). During heavy downpours, I do get a few small trickles down the sides of my bed bed (in the rear 1/3rd), but since I have a bed mat, the small amount of water just runs under it and then out the tailgate without getting anything wet. No need for me to seal it completely (not worth uninstalling the cover just to seal the small trickles).
Click to expand...

Yup! What @ToyoDrew Said

Log in or Sign up

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#77881
Bridge4 Well-Known Member

#77882
Koitz Well-Known Member

#77883
Connaghan Well-Known Member

#77884
8102 Well-Known Member

#77885
scottsglock29 Well-Known Member

#77886
Sr_Suerte Well-Known Member

#77887
Jonesy78672 Well-Known Member

#77888
mrproduxn Well-Known Member

#77889
mrproduxn Well-Known Member

#77890
TACOsoup Well-Known Member

#77891
scottsglock29 Well-Known Member

#77892
MowHawk Well-Known Member

#77893
MowHawk Well-Known Member

#77894
TACOsoup Well-Known Member

#77895
DesertTRD Active Member

#77896
Papadave418 Well-Known Member

#77897
RobP62 NVR20LD

#77898
RobP62 NVR20LD

#77899
RobP62 NVR20LD

#77900
RobP62 NVR20LD

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#77881 Bridge4 Well-Known Member

#77882 Koitz Well-Known Member

#77883 Connaghan Well-Known Member

#77884 8102 Well-Known Member

#77885 scottsglock29 Well-Known Member

#77886 Sr_Suerte Well-Known Member

#77887 Jonesy78672 Well-Known Member

#77888 mrproduxn Well-Known Member

#77889 mrproduxn Well-Known Member

#77890 TACOsoup Well-Known Member

#77891 scottsglock29 Well-Known Member

#77892 MowHawk Well-Known Member

#77893 MowHawk Well-Known Member

#77894 TACOsoup Well-Known Member

#77895 DesertTRD Active Member

#77896 Papadave418 Well-Known Member

#77897 RobP62 NVR20LD

#77898 RobP62 NVR20LD

#77899 RobP62 NVR20LD

#77900 RobP62 NVR20LD

Products Discussed in Entire Site Forum: 3rd Gen. Tacomas (2016-2023) Thread: What Have You Done To Your 3rd Gen Today?

#77881
Bridge4 Well-Known Member

#77882
Koitz Well-Known Member

#77883
Connaghan Well-Known Member

#77884
8102 Well-Known Member

#77885
scottsglock29 Well-Known Member

#77886
Sr_Suerte Well-Known Member

#77887
Jonesy78672 Well-Known Member

#77888
mrproduxn Well-Known Member

#77889
mrproduxn Well-Known Member

#77890
TACOsoup Well-Known Member

#77891
scottsglock29 Well-Known Member

#77892
MowHawk Well-Known Member

#77893
MowHawk Well-Known Member

#77894
TACOsoup Well-Known Member

#77895
DesertTRD Active Member

#77896
Papadave418 Well-Known Member

#77897
RobP62 NVR20LD

#77898
RobP62 NVR20LD

#77899
RobP62 NVR20LD

#77900
RobP62 NVR20LD

Products Discussed in