Anytime Rear Camera Mod for 2nd Gen Tacomas

Tacoma World,

Just as the title says! Anytime Rear Camera for the 2nd Gen Tacomas 2009-2015! The mod will work on both the rear view mirror and head unit cameras and is very easy to install. Just follow step by step instructions! I personally use mine (3rd Gen) ALL the time. I tow from time to time and love having a way to check trailer connections and cargo while driving. I also love being able to watch my tow/recovery strap become taught while pulling/recovering a buddy out of a hole. I also use it to make sure I pull far enough into the garage/parking spots. Your use may vary.



This kit "tricks" the rear view mirror or head unit backup camera into thinking the vehicle is in reverse at anytime you flip the switch. It can be activated at ANYTIME, or even all the time. This kit is especially awesome because it has the ability to activate the reverse camera without triggering the reverse lights. The reverse camera and lights still work as normal while shifting the vehicle to Reverse.

Free shipping is included on all kits. The kit takes about 30 minutes to install and you can mount the switch anywhere you would like (may require extending wires in certain circumstances). All you need is the ability cut, strip, and splice some wires (instructions provided) and you're all set! This kit includes a pre-wired harness that is soldered and wrapped in heat shrink. This is NOT a "plug" and play kit. You WILL need to cut one wire and splice into a couple more.

$15 Basic kit Includes - BYOS 'Bring Your Own Switch' Also Compatible with Switch Pros SP8100+ and SPODs: Click Here to Order
-Step by step installation guide
-1x Inline "Y" pre-wired harness
-1x Wiring diagram and step by step full color installation instructions.

$50 OEM STYLE Kit includes: Click Here to Order
-Basic kit with a provided OEM style "REAR CAMERA" illuminated push button switch. All switches are black with white lettering. Illumination is standard Blue, but also available in White, Red, and Green. Other colors are made to order and will take extra time. The switch is pre-wired, soldered, and wrapped in heat shrink with 2' of additional lead wires. Long enough to reach the cubbyhole on the left side of the steering wheel. This switch will fit inside the "blank" spots. No trimming required to fit. SPECIFY WHETHER YOU HAVE A REAR VIEW MIRROR OR HEAD UNIT CAMERA AND WHERE YOU ARE MOUNTING THIS SWITCH; CENTER STACK AREA OR CUBBYHOLE AREA ON DRIVERS LEFT. There are two sizes/shapes of the OEM Style Switches. Center stack switches may take a little longer to ship.




Each kit is tested for functionality with a multi-meter before shipping. A full color installation guide is included with all kits.

For those that remember the old kits made by @brendanwebster911 he is an Army buddy and I have taken over the production of these kits from him. Kits are still Veteran designed and assembled.

To Order: Message me or click the PayPal link below. Be sure to leave shipping address and the the type and color kit wanted.

PayPal: LOGISTICS91@GMAIL.COM

3rd Gen Tacoma Thread
https://www.tacomaworld.com/threads/anytime-rear-camera-its-back.534785/

 

I'm interested. If I was to order the switch for the center part (blanks underneath hvac controls) in white, would there be a wait time?

 

Nuno,

Slight delay, waiting for center switches to come in. Upon purchase, I could ship you the rest of the kit and ship the kit once it comes in. This way you can have everything wired ahead of time.

Like the pic with J-Lau. It's impossible for him to take a non-creepy pic. Haha

Thanks
JJ

 

LOL! He's my guy. I'd wait for it all, no rush. I'll place the order later. On my phone right now.

Thanks for the quick reply!

 

Anytime man. Thanks for reaching out.

 

Will this work with aftermarket head units

 

Rick,

As long as you have a stock rear camera now that is functioning with the aftermarket head unit? If so, then yes it will work.

Thanks
JJ

 

Sweet I want one with the smaller under console switches please.

 

PM Sent

 

Pictures of harness/wiring assembly?

 

So very much interested in this, any chance you are in or near Oregon? I hate PP with a passion unrivaled by the stars.

 

I’m in Arizona. I’ll shoot you a PM, see if we can’t work something out.

 

subd

 

Payment sent for BYOS

 

Thanks for your order. Will process and ship ASAP.

JJ

 

Just payed for the OEM Left kit in white. Looking forward to getting it!

 

Payment received. Much appreciated D.

JJ

 

Where in AZ?

 

Me me me...pm sent