What Have You Done To Your 3rd Gen Today?

Which kit is this? And, which vendor are you using for the parts?

 

PM me a price, I might buy them from you.

 

new roll up bedcover!

 

I'd suggest strapping that rear wheel to the rear bar if you haven't done that already. Take a turn with a loose bike and you're gonna have a bad time.

 

Very nice upgrade, I want to do that to my rays but in Mgm powdercoat

 

Got the new 2018 Husky mats with the tabs

 

Email this guy stan@pcbolts.com and ask him if he can get that color. He’s quick to respond and helped me out. He’s out in Arizona and I shipped mine and got it back in less than one week. Reason why I went with him is bc he’s been doing bolts for awhile and his seems to not chip and my local shops didn’t recommend doing it bc they said theirs would chip. Obviously don’t torque them too much and handle with care.

 

Whenever you get around to doing this, post it up I’m super annoyed with the passenger side mat sliding towards the front, also annoyed with my passengers doing nothing about it.

 

Tabs?

 

Thanks!! Will do

 

Bilstein 5100 front and rear
OME 887 coils
SPC upper control arms
Dakar heavy leaf pack
1/4 Taco lean spacer

It is from @HeadStrong Off-Road.

 

Sorry, meant cutouts for the passenger side tab lock thingies that are new to 2018

 

Nice! SR envy is a real thing.

 

Just make sure you apply red or blue thread locker and they won't ever come out.

 

Very nice. Welcome to the forum .

Care to share any details?

 

The LED install took 20 mins, very easy. Passenger side I removed two 10mm bolts to slide over the washer fluid, and two 10mm bolts holding the top of the highlight. You DO NOT need to remove the headlight. With the two headlight support screws out it gives you just a little bit of wiggle room to lean the headlight forward and I got both sides in very easily. Just be sure to orient the bulbs so that the LED’s are on the left and right side. Drove last night with them and much crisper than the stock head lights.

 

its a 2017 SR5, 3" lift with bilstein 5100 all 4 corners. toytec aal, light racing UCA (alignment to spec except caster up to 3.2). and just this week got new shoes. 16x8.5 with 265/75/16. Last time i owned a Tacoma was in 2005. Slowly getting back to it. It is a 4x2, no need for 4x4 in Miami.

 

Absolutely, I just need an eye hook for a catch point for the strap. This was more of a test fit for this coming weekend, but now a winter storm is going to hit Northern California and everyone is freaking out

 

We like 4X2 guys too, especially those who mod! It's a Tacoma man!!
Welcome to the herd!