Keystone State Thread

ohhh. i didn't really zoom in. He deduced that solely from the emblem on the front grille of the car lol

 

I really need someone to drive my truck and figure out what the fuck is wrong with my front end I have the slightest clue what could be wrong. Maybe someone with more mechanical knowledge then me.

 

You may want to add symptoms and things you have ruled out, or already tried, along with the question.
A limited number of components:
Wheels
Tires
Upper Ball Joints
Lower Ball Joints
Upper Control Arm Bushings
Lower Control Arm Bushings
CV Shafts
Wheel Hub/Bearings
Differential bearings/bushings
Front Driveshaft Front U-joint
Front Driveshaft Rear U-Joint
Outer Tie Rod Ends
Steering Rack/Power Steering Pump/Fluid
Steering column bushing
And out on a limb - motor mounts

If there are additional items that affect the front end, I am unaware of them, and hopefully others will chime in.

I'm sure that there are enough eyes and experience on this thread willing to help you out.

If it is a vibration, does it increase with speed, or does it only occur at certain speeds?

Does the symptom exist in both 2wd and 4wd? Also 3wd if your name is Floyd.

Have you rotated wheels/tires or changed inflation?

 

I'm in the same boat I got all sorts of clunking going on with mine,took it to a reputable mechanic and found nothing wtf to do

 

So basically it's really squeaking. Uca bushing are new so can't be that. I'm thinking it might be lca bushing but not positive on that either way I would need someone else to take a look at it.
Damn truck only has 40k mi but I do wheel it so who knows

 

You have squeaking? Wheel well area?

 

Its only coming from the drivers side should of mentioned that before. But other then that no clue. Wish I had an answer to that.

 

Icon coilovers?

 

I was thinking the same thing.

 

Nope billies. I installed new top hats when I installed them.

 

anyone utilize the Purple Lizard maps for trails open to 4wd?

https://www.purplelizard.com/collections/maps/products/lizard-adventure-pack

trying to plan soe day trips in Pa for trail exploration kinda stuff

 

Id be happy to.

 

I need to weld up your shock mounts. That's project#3, after maintenance and corrosion control day, and finishing a set of armor on a 4runner.

 

Not a huge rush. Just throw the mounts in line of your other stuff! When you get to it, you get to it. Thanks man!

 

In 3WD I had no symptoms.

Breezed through everything that @Grand dude did at AAOA.

My truck worked perfectly. Ask my shotgunner @loosnut

When in 4WD, everything seems to clunk, bang, creak and groan.

 

Anybody get any snow?
Hooked the generator about 4:30.

 

F you, I got at least 1.5 feet and a little more coming.

 

Up further north we got maybe an inch or two...wish we had more

 

I got a couple inches but haven't had power in a few hours.

 

maybe 12
' in milford...everything is closed..trees all over, as power lnes , poles etc