Long Travel BS Thread

i just want to know if i can just keep the one i have? (oem drive shaft)

how would you go about making it into a fixed yoke if the slip yoke in the tranny

 

Does anyone have the link to the build thread of the guy who got a flat tire and things escalated quickly? I remember those key words but the search isn't helping me. Thanks.

 

You keep your oem shaft. Get a slip added Tap the trans shaft. Forgot if it threaded. Get a new input shaft that bolts up. Search the term "sye" slip yoke eliminated. Local driveshaft shop can get you parts and rework your driveshaft

 

anymore pic

 

and thanks for the help

 

https://www.tacomaworld.com/threads/toyotally-awesome-08-tacoma.328604/

 

That's all I got. I'm 2 piece. This is roughly what I had in mind. Bolt a yoke to your output shaft.

 

ok thanks

 

You gonna sell?

 

He won't have too from what I've been told you can convert piggybacks to a remote reservoir.

 

^^Yup converting to remote reservoirs as we speak.

 

Any one sell solid cab mounts for 1st gen. Can’t seem to find any. Or do I have to make them myself?

 

those running a plus 3.5 kit what length front brake line is needed?

 

Unless you're building it yourself
It will be included with the TC and camburg kits and I'd assume solo too

 

Agreed it should have come with the kit. What are you rolling with jqueener?

 

I bought used camburg arms.
Thanks

 

You'll want to get a measurement specifically from someone with the same kit IMO. Each company provides tie tabs in slightly different spots etc. Another thought too...you could use this opportunity to clean up the OE brake line mess IE: hard line - soft line - hard line and just run one kevlar line from the top of the frame to the caliper. If you want to do that just grab a piece of string, mock it up, cut it to length, measure the string and order exactly what you need from Crown Performance.

 

Contact Brent at Halo supercars. He has the cad data from making mine and can make you a set. http://www.halosupercars.com/blog/

 

If you send me the file I can make you some as well! Or I can draw em up and cut em got a plasma table at work.

Also in non LT news.
Bendtech dragons are so dope! Just got one at work

 

What should I replace up from when installing total chaos LT kit? So far ive got tie rod ends, lower ball joint, and wheel bearings (wheel bearings I just need in general)
Anything else I should look into freshening up?