What Have You Done To Your 2nd Gen Tacoma Today?

They're both marked as +spec, but it is worth a shot I guess. It'll be easy enough to do and free haha

 

If it's the UG suction cup mount, expect it to fall off with humidity/temperature changes. I have mine mounted close to your location, using the sunvisor mounting hole, once you get used to it, it is a nice location due to being out of the way enough but also close to a normal eye line.



Matt

 

One might be slightly taller than the other even though they are the same + spec. If so you could put the taller one on the driver side.

 

I added a truck cap. I got a great deal used. I like it!

 

Got the front diff installed last night, awaiting the 3rd member and locker now from ECGS.

 

Added a spare tire carrier to the bed it will allow me to mount my second battery underneath it and free up some real estate...

 

what fairlead is that I need to get one for my ARB bumper

 

I ordered mine through southeast overland. Its just called an offset hawse fairlead I believe. It took me a while to find one when I was looking haha

 

I stuffed a .5" shim in mine. Then used the trim packer and .25" plate up front. It's close enough where I can't tell.

 

Gotcha! I'll try that hopefully today and post back with how it goes. Thank you.

Yea spacers are what others have reccomend so far. If I can I want to avoid a trim packer since I'd have to take the strut assembly apart and then most likely have to get an alignment afterwards.

 

Did you lift the rear or just the front. Curious bc I’m planning to lift at some point in the near future.

 

Did your dakars come with the overload leaf like this? https://www.headstrongoffroad.com/store/p465/OME_Add-a-leaf_(PAIR)_-_D29XL_.html

That would raise one side 15mm (0.59 inches). Same as a small spacer but at least you would get some extra support if you have heavier loads.

 

That looks sleek. Love the Grille as well

 

Yes both sides have the overload spring. Could I just take either that or just one leaf from the passenger side and call it a day? Or would that drastically change something else?

 

Installed 1 of 2 ram mounts

 

What is the screen where the cup holders go?

 

That's my back up camera monitor thats what the second ram mount is for get that installed when it comes in today or tomorrow if I have time

 

Updated the StartupScreen / DisplayOffScreen.....Cant believe it took me over a year to learn this was an option

 

We match. Wish my radio let me but mine is the earlier version of it

 

Did Deaver AAL in the back.