BORA vs Spidertrax Wheel Spacers

Any thoughts on BORA .75-1.0 vs Spidertrax 1.25... One better than the other? Putting these black TRD wheels on below and need a spacer, really don't feel like trail and error right now any suggestion and greatly appreciated!

 

Tacoma 16" Gloss Black Baja Alloy Wheels with Center Caps

- Made by TRD for Toyota.

- Low pressure cast aluminum.

- 16" x 7"

- 30mm offset.

- 6 x 139.7 bolt pattern.

- Rim is TPMS compatible (stock 20 degree sensor).

- Recommended Tire Size

BFG All-Terrain T/A tire LT265/75R16 M+S

 

I have a 1.25 Spidertraxx. they are both good companies. I like the stance of the 1.25, puts the tires even with my fenders and even gives just a tiny bit of poke but I also have a 2nd gen. but company wise, ur good either way. thickness all comes down to personal preference. what are the specs on ur OEM rims? what kind of stance would u like to achieve?

 

I honestly dont know the specs on the OEM wheels but found the specs for the black Baja wheels. I recently tried to mount the black ones and they barley rubbed on the inside. I dont want them sticking out much more then they are now in the pic below. I think the brands are good either way, Bora or ST. Just trying to decide on .75, 1.0, or 1.25.

 

yeah those black ones u linked have a 5'' back spacing which is terrible hahaha normally you want at most a 4.25''. I will see if I can find the specs on the oem first gen wheels u have and gauge the size of spacer u need to retain factory stance

 

Lol imagine that!

This is what I am finding... So 15mm difference?


Tacoma OEM (silver powder coated)
- 16x7
- 15mm offset

Tacoma Gloss Black Baja Alloy Wheels
- 16" x 7"
- 30mm offset

 

what size engine do u have and I'm assuming its a 4wd

 

so that's a 4.5 BS on ur OEM Rims vs the 5'' for the baja so a .5 spacer would put u at factory stance

 

Yes 4x4, four door, 3.4.

 

That being said the BORA .75 would work and put me just a bit outside of factory stance. Correct?

 

yeah, it would give you 4.25 inches of back spacing, pushing ur wheel further out then the factory set up by .25''.

4.25 is a good BS to have if u want to run bigger tires as well, its ideal on the 2nd gens for running 285/70/17's

 

Awesome man! I will go with that then.

Yeah once these tires run wear down I am planning to go up a size.

It currently has a 2 inch RevTeh (block) suspension lift on it would planning to do a 3" maybe ToyTech in the future. When needs new rubbers. Sincerely thanks for the info! You have been the first to give me good, detailed info!

 

yeah no problem man! enjoy the new rims post up a pic when they are installed!

 

Yes sir and will do!!!!

 

I recently ordered BORAs and wasn't very happy. Took about 6-7 weeks to arrive and they were missing 1 lug nug. So I have a wheel rolling on 5 lugs instead of 6. Tried contacting them, talked to Lenny on the phone and he said I'd get a new lug nut in the mail. That was 2 weeks ago and haven't gotten anything. I'd 100% go Spidertrax if I had to do it again.

 

I just got some 1" boras from @Wheeler's Off-Road Inc great service and only took a few days to get them defiantly recommend them (the boras and wheelers)

 

Have had my Spydertrax 1.25" spacers on for about a year and a half now and have had zero problems.